Want this question answered?
You take a wire and stick it to the positive end of the batter. Then connect another wire to the negative end of the battery. Connect both wires to the lightbulb.
you take the blue wire and connect it with the red then connect it to the yellow then you cut the green wire and there you go!
The proper way to connect a second starter wire depends with the configuration used.
If you connect the ground wire to the hot wire it will trip the breaker. If you get the white and black wires reversed it will still work but does not meet code.
just leave the neutral wire as it is and connect the other two !!
Whichever one you connect to the positive terminal. The colors are there so you can find the same wire at the other end.
how do you connect the wire from the alternater to the starter?
Connect the sub woofer to the equalizer or amplifier. The positive wire will need to be connected to a power source. Connect the ground wire. Connect the auxiliary wire to the amplifier.
Don't connect the red wire or you will die.
You take a wire and stick it to the positive end of the batter. Then connect another wire to the negative end of the battery. Connect both wires to the lightbulb.
To connect a three prong power cord to a stove, remove the back of the stove and take off the old cord using a screwdriver. Connect the new cord according to the wire colors with the screwdriver.
I connect the red wire to the blue wire to deactivate a bomb.
It depends on what 277 volt device you are trying to connect.
To connect an RJ11 telephone jack, first, strip the telephone line providing the dial tone. Then, strip those wires to show the copper. Then, loosen the screws on the jack. Connect the red wire to the red screw, and tighten the screw. Connect the green wire to the green screw, and tighten the screw. Connect the black wire to the black screw, and tighten the screw. Connect the yellow wire to the yellow screw, and tighten the screw. If the wiring does not match the colors of the jack, then follow these steps: First, connect the blue wire to the red screw, and tighten the screw. Then, connect the blue/white wire to the green screw, and tighten the screw. Then, connect the orange/white wire to the black screw, and tighten the screw. Then, connect the orange wire to the yellow screw, and tighten the screw. Then, screw the jack onto the wall with the appropriate screws. Connect a working telephone to the jack, and check for a dial tone. If you hear a dial tone, then you have successfully connected all of the wires to the jack. If you do not hear a dial tone, check to make sure that all of the wires are securely on the screws, and that none of the copper has come off of the wire.
Connect to the circuit neutral wire which should also be white.
Connect the green wire to the brown striped black wire.
Which wire is the power