answersLogoWhite

0

Don't connect the red wire or you will die.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Music & Radio

Do you need to wire the dimmer illumination wire if your new radio dont have it?

No. There is no illumination, speed or retained accesory power in the factory radio. It is accomplished with car's CANbus communication. To hookup illumination wire on 2006 VW Jetta, tap into white/black wire at the light switch. It dims your lights on your radio. You can also set up different color for day and night.


On the factory radio wire harness of a 2002 Oldsmobile Alero what color do you connect to the remote wire of your amplifier?

If you are unsure of the remote wire, locate your radio fuse and get a fuse connector. hook it into the fuse and run it wherever you need it. all the remote does is swith the equipment on and off.


What color wire is for radio power in your 19 78 camaro?

Don't know the color of the wire but you will just have to use a test light to see what wire is hot to the radio.


Where do I hook up the orange wire when installing an aftermarket radio in a 1991 dodge Dakota?

that wire is for the radio dimmer. when you turn on your headlights the radio dims so your not blinded at night. Some aftermarket stereos have a place to hook this wire up and some don't.


Where can i find Color code radio wires for 96 Toyota Corolla?

Radio Constant 12V+ Wire: Blue/Yellow Radio Switched 12V+ Wire: Gray Radio Ground Wire: Brown Radio Illumination Wire: Green Radio Dimmer Wire: N/A Radio Antenna Trigger Wire: Black/Red Radio Amp Trigger Wire: None Front Speakers Size: 5 1/4″ Front Speakers Location: Doors Left Front Speaker Wire (+): Pink Left Front Speaker Wire (-): Purple Right Front Speaker Wire (+): Light Green Right Front Speaker Wire (-): Blue Rear Speakers Size: 6″ x 9″ Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Black Left Rear Speaker Wire (-): Yellow Right Rear Speaker Wire (+): Red Right Rear Speaker Wire (-): White

Related Questions

How do I install a dimmer switch with 3 wires?

To install a dimmer switch with 3 wires, first turn off the power to the circuit. Connect the ground wire to the green screw on the dimmer switch. Connect the black wire to the wire labeled "hot" on the dimmer switch. Connect the red wire to the wire labeled "load" on the dimmer switch. Secure the wires with wire nuts and install the dimmer switch into the electrical box. Turn the power back on and test the dimmer switch.


What wire does the illumination dimmer wire connect to?

12v switched source. such as headlight switch or dimmer on the dash.


When hooking up a new car stereo with a dash illumination dimmer what wires do i connect to make lights work?

Ford Taurus Car Stereo Radio Wiring Diagram Radio Constant 12V+ Wire: Green/Yellow Radio Ignition SwitchFord Taurus Car Stereo Radio Wiring Diagram Radio Constant 12V+ Wire: Green/Yellow Radio Ignition Switched 12V+ Wire: Yellow/Black Radio Ground Wire: Black/Light Green Radio Illumination ...Dimmer Wire: Light Blue/Red Radio Antenna Trigger Wire: Orange/Blue Radio Amplifier Trigger Wire: ...ed 12V+ Wire: Yellow/Black Radio Ground Wire: Black/Light Green Radio Illumination ...Dimmer Wire: Light Blue/Red Radio Antenna Trigger Wire: Orange/Blue Radio Amplifier Trigger Wire: ...


How do you wire a 3-way dimmer switch?

To wire a 3-way dimmer switch, you need to connect the common wire from the dimmer to the common wire in the electrical box. Then, connect the traveler wires from the dimmer to the traveler wires in the box. Make sure to follow the manufacturer's instructions and turn off the power before starting the installation.


How to wire a 3-way dimmer switch correctly?

To wire a 3-way dimmer switch correctly, you need to connect the common wire from the dimmer to the common wire in the electrical box. Then, connect the traveler wires from the dimmer to the traveler wires in the box. Make sure to follow the manufacturer's instructions and turn off the power before starting the installation.


Where does the dimmer wire go on a after market radio?

It would go to the dimmer that controls the brightness of the dash lights.


How do I properly wire a three-way dimmer switch in my home?

To properly wire a three-way dimmer switch in your home, you will need to follow these steps: Turn off the power to the circuit at the breaker box. Remove the existing switch and identify the common wire, traveler wires, and ground wire. Connect the common wire to the black wire on the dimmer switch. Connect the traveler wires to the other two wires on the dimmer switch. Connect the ground wire to the green screw on the dimmer switch. Secure the dimmer switch in place and turn the power back on to test the dimmer. It is important to follow the manufacturer's instructions and consult a professional if you are unsure about any step in the process.


How should I properly wire a dimmer light switch in my home?

To properly wire a dimmer light switch in your home, first turn off the power to the circuit at the breaker box. Remove the existing switch and connect the dimmer switch following the manufacturer's instructions. Typically, you will connect the hot wire to the black wire on the dimmer switch, the neutral wire to the white wire, and the ground wire to the green or bare wire. Secure the wires with wire nuts and install the dimmer switch into the electrical box. Turn the power back on and test the dimmer switch to ensure it is working correctly.


How do I install a dimmer switch with 4 wires?

To install a dimmer switch with 4 wires, first turn off the power to the circuit. Connect the ground wire to the green screw on the dimmer switch. Connect the black wire to the black screw, the red wire to the red screw, and the white wire to the silver screw. Secure the wires with wire nuts and mount the dimmer switch into the electrical box. Turn the power back on and test the dimmer switch to ensure it is working properly.


How do you properly wire a dimmer light switch?

To properly wire a dimmer light switch, first turn off the power to the circuit. Remove the old switch and connect the dimmer switch's wires to the corresponding wires in the electrical box. Typically, you'll connect the black wire to the hot wire, the green wire to the ground wire, and the red or white wire to the neutral wire. Secure the connections with wire nuts and then carefully tuck the wires back into the box before attaching the dimmer switch to the box. Finally, turn the power back on and test the dimmer switch to ensure it is working correctly.


How can I properly wire a 2 way dimmer switch in my home?

To properly wire a 2-way dimmer switch in your home, follow these steps: Turn off the power to the circuit at the breaker box. Remove the existing switch from the wall. Identify the common wire, traveler wires, and ground wire. Connect the common wire to the common terminal on the dimmer switch. Connect the traveler wires to the other terminals on the dimmer switch. Connect the ground wire to the ground terminal on the dimmer switch. Secure the dimmer switch in the wall box and turn the power back on to test the switch. It is recommended to consult a professional electrician if you are unsure about any step in the process.


How can I wire a double switch with a single dimmer for LED lights?

To wire a double switch with a single dimmer for LED lights, you will need to connect the hot wire from the power source to the common terminal of the double switch. Then, connect the hot wire from the LED lights to one of the switch terminals. Finally, connect the dimmer switch to the other switch terminal. Make sure to follow the manufacturer's instructions and consult a professional if needed.