Want this question answered?
if the receiver unit of the wireless mic has a balanced output i.e XLR from receiver to XLR of mixer then yes. if on the other it just has a 1/4 inch jack output(unbalanced) then no.
You use an adapter.
Yes it is just a preamp you need an audio interface that will connect the preamp to the audio interface into the computer and obviously a Mic in front of it
Yes, if you have a receiver for it.
Yes, but the 'lead guitar' sound (with distortion and other effects) won't be heard at the mixer. You will do better to connect a line out (if it has one) or mic the guitar amplifier to get the tone of the speaker plus any distortion or overdrive you need.
As a mic, the main purpose of a boom mic is a tool helping in the production sound mixer. Using the boom mic is more intricate and specialized piece of equipment on which the operator stands, allowing precise control of the mic at a great distance.
either buy a wireless bluetooth mic, or wired mic. connect or plug in the mic and then should be ready to chat :)
no but all you do is connect the mic to a usb and and connect the dualshock3 (ps3 controller) to navigate during the menu
The one marked "Mic." You may need an adapter.
Yes You Have To Connect It First
You must both plug the Mic into the back of the Wii and connect a Wii remote.
A preamp is required for all microphones, and is built in to the mixer if it accepts microphone inputs. The feature required for most condenser microphones is phantom power, a 48 volt signal that is supplied by the mixer to power the electronics inside the microphone. You must use an XLR (three pin) cable to connect the mic to the mixer to provide this power. There will be a Phantom or 48V switch on the mixer to turn this feature on and off.