how do you connect the hyraulic master cylinder to the clutch slave cylinder on a 2000 chevy S10 pickup 2.2 4.cylinder
The clutch slave cylinder , for a hydraulic clutch , is inside the manual transmission bellhousing
If the clutch is hydraulic, yes. If the linkage is mechanical, no.
You can't, There is no adjustment. You either have a bad clutch slave cylinder, are worn out clutch parts.
There is NO adjustment. It is adjusted automatically through the hydraulic slave cylinder. Probley time for a NEW clutch kit.
They don't use a cable; it's a hydraulic assembly with a master cylinder, line, tube, and slave.
Its hydraulic ,you cant,check your slave cylinder to see if its leaking,its located thru a rubber cover on side of transmission,if leaking replace and bleed,also check clutch master cylinder,if not leaking,then you might need a new clutch kit.
no adjustment on hydraulic clutch, worn clutch disc and pressure plate
how do you replace hydraulic line on a 1997 s-10
where and how to adjust clutch pedal 1993 s10 It is hydraulic operated, there is no adjustment.
You will need to remove the transmission to replace the clutch slave.
look at the right side of the firewall.
What about the master cylinder? They go out, ha. That's all I can help you with though.