0
STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:
1.Prepare the materials.
2.Remove the bulb from the receptacle.
3.Unscrew the screw in the receptacle using a screw driver.
4.Extend the cord of a wire using pliers.
5.Connect the cords of the wire in between the loosen screw and the receptacle.
6.Put the bulb again on the receptacle.
7.Attach the cord at the end of both batteries.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is the amps In a simple electric circuit with a 12 volt supply and a 24 ohm resistor?
0.5 amps
Is there a method to control a dc motor speed by simple circuit?
The easiest way to control any electric current to any device is with the inline use of either a manual or electric reistate.
What are normally open and close circuits?
The electric path which starts from the positive terminal of a cell or battery ends at its negative terminal, without any break, is called closed electric circuit or complete electric circuit. The electric path,which starts from the positive terminal of a cell or battery, is broken at some point, is called open electric circuit or incomplete electric circuit.
Why does an electric circuit have to be closed for it to work?
yes it does have to be a closed circuit
What is the electric circuit where current flows through all parts of the circuit?
complex circuit
What is the Conclusion of Simple Electric Circuit?
hi bula
What is happening when you turn an electric circuit off?
When you switch off an electrical circuit you tend to create a 'break' in the circuit, preventing the electric current to flow around the circuit, this can be caused by a simple switch or a break in the circuit, e.g a disconnected wire.
What is an alternate name for an electric diagram?
There is no "proper name" for an electrical diagram. They are commonly called circuit diagrams.
What is a electrical curcuit?
An electric circuit is a path in which electrons from a voltage or current source flow. Electric current flows in a closed path called an electric circuit. Its so simple, though my friend from extraminds help me with proper answer.
What is the amps In a simple electric circuit with a 12 volt supply and a 24 ohm resistor?
0.5 amps
What are the four features required to construct a working simple circuit?
power source, wire, switch, end fixture. Simplest circuit would be a power source and a heating element. No wire or switch needed.
How do you construct a simple circuit?
STEPS IN CONSTRUCTING A SIMPLE ELECTRIC CIRCUIT:1.Prepare the materials.2.Remove the bulb from the receptacle.3.Unscrew the screw in the receptacle using a screw driver.4.Extend the cord of a wire using pliers.5.Connect the cords of the wire in between the loosen screw and the receptacle.6.Put the bulb again on the receptacle.7.Attach the cord at the end of both batteries.
What can be produced by electrical current in a simple circuit?
There are three effects produced by an electric current:heating effectmagnetic effectchemical effect
What causes a electric current in a electric circuit?
Voltage causes current to flow in an electric circuit.
The pathway taken by an electric current is a?
The term is "circuit" (from the same root as circle) An electric circuit must be uninterrupted for the current to flow. (This is why circuit-breakers are also called circuit-interruptors.)
What is the history of the electric circuit?
the history of the electric circuit is that the person who made it his name is jack kilby but the history is that the electric circuit was one of the easiest way was to make the electric circuit when the electricity went out. THE END
How can you make the electric circuit?
Anything with a voltage power source, connecting wire and a load is an electric circuit. Hence if you have a flashlight you have an electric circuit.
