The simplest (and, really, only feasible way) is to get a set of doors with PDLs and swap them in, then you should find a wiring diagram for a vehicle with PDLs and duplicate that.
Locate a 1995ish Blazer with power mirrors and door locks in a junk yard. Ask them if you can strip the doors of the parts you need to do the swap (don't forget the wire harness).
how to remove the door panel of a 1995 s10
is it a 4x4?? yes
The stock gear ratio for a 1995 Chevy Blazer is 3.73. This provides a good balance of fuel economy and power to the rear wheels.
you might check for a blown fuse.
A 1995 blazer does not have a crank sensor. SORRY
The 1995 Blazer was rated at 5000lbs towing capacity.
fuses box located driver side between the door and the dashboard at rearview mirror level....have fun! Rocco 95
yes?
Battery first. Main Power fuse second. Bad Ground connection third. Ignition switch fourth.
A power see wiring diagram, for your 1995 Chevrolet Blazer, can be obtained from most Chevrolet dealerships. The wiring diagram can also be found at most auto-parts stores.
where is the fuel shut off swith on a 1995 Chevy s -10 blazer at
Where is the idle speed motor located at on a 1995 chevy blazer?