answersLogoWhite

0

How do you correctly tension belts?

Updated: 9/26/2023
User Avatar

Wiki User

6y ago

Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you correctly tension belts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you correctly tension belts and chains?

One has to tension belts and chains according to what torque is needed on an engine. The tension varies upon each engine. If one needs this done one should look into a mechanic.


Do serpentine belts stretch?

Yes, you can stretch it to put it on and then adjust the tension.


When replacing belts on a 92 Plymouth acclaim do you set the timing first or after you put the belts on?

if you are referring to replacing the timing belts, there are settings tha must be set correctly as you are installing the belts.there are marks on the timing pulleys that must be set correctly or the cam and crank will not be timed correctly,and no matter what you do to timing after that it will never be right,unless thses are lined up correctly to start with


How do you tighten a Pontiac Grand Prix belts?

Your idler should keep the belts tight. I've had to change my tension idler on my 1997 gtp


Why does your 1990 Jeep Cherokee engine sqeal when you turn the heat on?

You should check the tension on the belts on ur engine. If they don't hve enough tension,the belts will squeal when running accesories such as the heater since it draws alot of power.


What does a belt tensioner do on an engine?

It keeps drive belts under tension (pulled tight)


How do you set serpentine belt tension on a Chrysler?

The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.


Why is there a squeal when you drive your sonata through puddles?

The squeeling if from the belts, this can be normal but you should check the belts to see if they are worn or cracked. Also check the tension this can be a problem aswell.


What could be causing a squealing from the engine in an infinity QX4 besides the belts?

It could be the bearing in your tension pulley.


Why does J30 squeak when you start it?

It might be one of your belts. Check the inside of each belt (the part that contacts the pulleys) for shininess or cracking. If the belts are okay, then check and/or tighten the tension. Steven


How do you replace alternator on 1986 Nissan 300 zx 3.0 liter 2 2?

Loosen the tension on the belts, unbolt the old one, bolt in the new one, and retighten the belts.


How do I tighten the serpentine belts on a 2000 Mitsubishi Galant 4-cylinder?

Specifically, where and what do I do to tension either belt? Thanks!