0
How do you covert a two prong welder plug to a three prong and ground out let?
Wiki User
∙ 15y ago
Need to know the amperage rating of the plug or the NEMA configuration of the plug and receptacle
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Which prong on the back of a three prong headlight sealed beam is ground?
Is it a plastic prong sealed together
What does the third prong ion a three prong pulg do?
The 3rd round plug is the ground connection.
Can one convert a two prong outlet to a three prong outlet?
Yes, provided that you have a ground wire in the box and that the ground wire is properly connected in the electric panel.
What are the designations of a three-prong plug?
On a three prong plug there will be a neutral blade, a "hot" blade and a ground blade. The neutral blade is wider that the "hot" blade. In North America the ground blade is "U" shaped.
What is wrong if you changed a four prong to a three prong and the dryer is not heating?
My question is WHY did you replace a four prong dryer plug with a three prong! 220 volt Electric dryers require two hot legs, a neutral and a system ground wire. Sounds as though you shunted one of the hots or the neutral. You need to install a four prong plug of the same configuration and wire it exactly as the original.
Can you plug a 3 prong extension into a 110 volt outlet?
Yes, provided the outlet has a three element receptacle. The third prong is ground. If you use an adapter that connects three prongs to a two slot outlet there is a shock danger.
How do you correctly wire a three blade 220 volt plug?
If you are in north America, black and red go to the main prongs and white to the ground (round prong) . Black and red can be on either main prong.
Is the AC wide prong for hot or neutral?
The AC wide prong is the neutral. An AC voltmeter measuring from narrow prong to ground should show line voltage; measurement from wide prong to ground should show zero. In a two-conductor power cord (and some three-conductor cords), the ridged side should be the neutral. In any light-bulb socket, the outer ridge should be wired to neutral.
Where do you ground the extra wire when plugging a 4 prong wire into a three prong outlet for a dryer at?
It may be a 220 Dryer, and you will need a new outlet installed. There should be no extra wires when connecting the Power cord to the plug
Where do you buy a crouse hinds 110v 3 prong waterproof cable 110v three prong on one ned and a female three prong screw on plug on the other?
Sure i do
Can you plug a three-prong dryer into a four-prong outlet or is there an adapter you should use?
You should install a four prong. The older ones were three prong and had no ground. An adaptor isn't made because it wouldn't fix the problem. You could make your own adaptor and cut the ground off with a pair of dykes, but don't.
If you have a spa that is 240V with 4 wires can you hook an extension cord from a 240V welder to it to see if it works if the cord only has three wires?
Well, maybe. What is the current rating on the spa circuit? What is the current rating on the welder? If the welder is larger than the outlet, then no. It must be the other way around. If the current ratings are OK, then yes. Your welder doesn't need 110V so it doesn't connext to neutral. Connect the hot leads to hot and ground to ground.
