0
There is a electric saw on the market now called the exact saw.i think
i have got the name right .
Draw a line across the floor where the centre of the door would be.and cut.
This saw is the perfect tool for this job .
The small piece of flooring left at end cut with a sharp chisel.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How difficult is it to install laminate flooring?
It is very easy to install laminate flooring and laminate tiles. Generally all you need to cut them is sharp scissors instead of a tile cutter which can save time and money.
What options are available for installing laminate wood flooring?
Laminate flooring has quite a few advantages over traditional hardwood. Firstly, laminate floors aren't prone to decay and wear at nearly the same rate. They're much easier to install, and use pre cut boards that snap together easily. This makes them a great solution for do it yourself enthusiasts.
How do you cut laminate flooring for transition pieces to fit if the flooring has already been installed?
This can be quite difficult. I would recommend removing the flooring back to the point where the transition needs to be, if possible, then cutting the single piece or pieces that need to be cut. The other method would require dropping a circular saw in from above and finishing the corners of the cut with a chisel.
Tips To Install Laminate Flooring?
Laminate flooring can be an attractive addition to any room of your house, but particularly rooms which must handle a lot of foot traffic, since the material is so durable and easy to clean. Although deciding to install laminate flooring can seem like a daunting task, there are just a few simple steps to follow. The most popular style of laminate flooring is a combination of board planks, fastened together with tongue and groove construction. You will always want to start at the left side of the room and work your way rightward. Spacers will need to be set up along each wall of the room, designating the expansion zone. Once you have accomplished that, begin laying down the material. Line up the short ends and lock them into place until you get to the end of the first row. Once you have, and it comes time to cut your last piece, simply measure the distance between the wall and the material and subtract a quarter inch. That is how you can estimate how large the last piece should be. As you experiment with the best ways to install laminate flooring, you will soon discover that cutting the laminate material is a task within itself. Handsaws and power tools with a carbon tipped blade are most commonly used. Always make sure that the decorative side of the laminate is facing you when you are cutting it. Keep in mind that your style of laminate flooring may require the use of a trim track, which helps to hold applicable trim in place securely. It is nailed or glued to an area called the subfloor. Also, don’t forget to keep transition elements in mind as you install your laminate flooring. These are pieces of material which serve as a bridge between your laminate flooring and other rooms in the house, so that the change between carpet, and your newly installed laminate flooring, for example, is not as visually jarring, and ends up being aesthetically pleasing. Although choosing to install laminate flooring can indeed be an arduous task, with a bit of advance planning and lots of patience, it can be a success.
Skills needed for laminate flooring installation?
Installing laminated floor might not be as difficult task to do as it seems especially if you are good with your hands. You will need to know how to measure everything correctly, learn how to install each board, and cut those that needs to be fitted right.
Create an Antique Look with Laminate?
There is nothing more beautiful and classic than the look of hardwood flooring throughout the home. However. wood floors are not that easy to care for and they are also quite expensive to acquire and have installed. Pergo laminate flooring is an awesome alternative to hardwood floors. This type of flooring gives a home the look and feel of real wood, without the price or the hassle. This type of flooring is sold at just about any home improvement center. It is very easy to install; therefore, you may even be able to cut costs by installing it yourself.
Installing Laminate Floors?
Installing laminate floors is a popular DIY project because laminate flooring is relatively easy to work with and doesn't require the same level of skill as hardwood flooring installation. Here are the general steps to guide you through the process of installing laminate floors: Materials and Tools You'll Need: Laminate flooring planks Underlayment (if not pre-attached to the planks) Spacers Saw (circular saw or jigsaw) Measuring tape Utility knife Flooring installation kit (includes tapping block and pull bar) Hammer Pencil Safety goggles Knee pads Step 1: Prepare the Subfloor Ensure that the subfloor is clean, dry, level, and structurally sound. If needed, repair any damaged areas and remove any existing flooring or carpeting. Install a moisture barrier or underlayment if required by the manufacturer's instructions. Step 2: Acclimate the Laminate Flooring Allow the laminate flooring to acclimate to the room's humidity and temperature for the recommended time (typically 48 hours) before installation. This helps prevent warping or buckling. Step 3: Plan the Layout Plan the layout of the laminate flooring, considering the direction of the planks, doorways, and any obstacles in the room. Laminate flooring should be installed perpendicular to the longest wall to create a visually appealing appearance. Step 4: Install the Underlayment If your laminate flooring does not have an attached underlayment, roll out the underlayment material according to the manufacturer's instructions. Overlap seams and tape them to prevent moisture infiltration. Step 5: Start Installation Begin installation in the left-hand corner of the room, working from left to right. Place spacers along the walls to maintain an expansion gap of about 1/4 inch. Step 6: Install the First Row Lay the first row of laminate planks with the tongue side facing the wall. Use a tapping block and hammer to lock the planks together. Be sure to stagger the joints between planks, and cut the last plank as needed to fit. Step 7: Continue Installation Continue installing subsequent rows, interlocking the planks by angling the tongue into the groove and tapping them together. Use the pull bar to help close gaps along the long edges of the planks. Step 8: Cut Planks Measure and cut planks to fit around doorways, corners, and any other obstacles. Use a saw (circular saw or jigsaw) for straight or curved cuts. Step 9: Complete the Installation Continue installing planks across the room until you reach the final row. Be sure to maintain the expansion gap along the walls. The last row may need to be cut lengthwise to fit. Step 10: Install Baseboards and Transition Strips Install baseboards or quarter-round molding to cover the expansion gap around the perimeter of the room. Additionally, install transition strips at doorways and between different flooring types. Step 11: Finish and Clean Carefully remove spacers, and inspect the floor for any visible gaps. Clean the floor to remove any debris, and follow the manufacturer's recommendations for any final steps, such as adding transition strips or applying moldings. Laminate flooring installation is generally straightforward for DIYers, but it's important to follow the manufacturer's specific instructions for your flooring product. If you encounter any challenges or are unsure about any aspect of the installation, consider consulting with a professional installer or seeking guidance from the flooring manufacturer. Proper installation ensures the longevity and appearance of your laminate floors.
What painting was cut into to enlarge a doorway?
The Last Supper
When grooming dogs should hair between pads be cut?
Yes. Though carefully as you do not want to cut the webbing. The hair between the pads of a dogs feet can make it hard to them to stand and walk on slick surfaces like laminate flooring and hardwood just like if you were wearing socks on a freshly waxed floor.
What famous painting was once cut into to enlarge a doorway?
The last supper
How do you cut laminate flooring?
The best way to cut laminate flooring is with either a power mitre saw, or a table saw. Depending on which way you are cutting it. To cut the length, use a power mitre saw, with a 40 tooth+ blade, keeping the "good" or "top" side up. If it's a 3" plank, you can use a 7 1/4" saw, a 5" a 10" saw, and anything bigger you should use a 12" saw. It's dangerous to make a parial cut, then turn the piece around to finish the cut. To "rip" the plank (cut along the length of the plank to make it "skinnier") you'll need to use a table saw, with a guide, and of course the blade guard. THE USE OF POWER SAWS CAN BE EXTREMELY DANGEROUS, BE CAREFUL, READ THE INSTRUCTIONS, ALWAYS WEAR EYE PROTECTION, ALWAYS KEEP YOUR FINGERS AWAY FROM THE BLADE, AND DO NOT RUSH YOUR CUT. IF YOU ARE A NOVICE, NOT FAMILIAR WITH THESE TOOLS, I'D RECOMMEND HIRING A PROFESSIONAL LICENSED FLOORING CONTRACTOR. THE PRICE YOU'D PAY A PRO IS A LOT LESS THAN LOSING A FINGER, OR FINGERS, OR AN EYE, ETC.
You are going to install laminate flooring in your fifth wheel camper Should it be glued to the sobfloor or just glue the joints and tack down one edge to keep it in place?
WHOA there Skippy!! NO NOT NEVER glue Laminate to anything it wont work Laminate is a floating floor and MUST not be glued or nailed or it will eventually buckle & be very nasty & ugly.. Cut it 1/2" short of all walls and cover the edge with a base trim or quarter round so it can slip * slide under the trim....
