0
The following steps are the keys to a good irrigation sprinkler design:
1. Identify water source for system; confirm pressure and flow
2. Confirm backflow prevention and any other code requirements
3. Determine what areas you want to water and how (see types of irrigation sprinklers)
4. Plot sprinklers for each area based on overlapping (head to head) coverage
5. Divide areas into zones of sprinklers based on max water flow
6. Specify type and location of control valves for each zone (see types of irrigation control valves)
7. Calculate the pipe size and quantity required to connect water source to valves to sprinklers
8. Determine type and location of sprinkler timer/controller (see types of irrigation sprinkler timers)
9. Calculate the wire quantity required to connect timer to valves
Various tutorials and sprinkler design services are available on the internet under search terms like "sprinkler system designer".
What else can I help you with?
What services can be used for sprinkler system design?
The services that can be used for sprinkler system design are residential areas for home gardening, farmers and nurseries to irrigate or water plants/crops.
Where can I find sprinkler designs for my business?
You can find a built sprinkler design system at the home depot. I buy all of my sprinklers and sprinkler systems at the home depot. You can go to a home depot at 2745 Teller road 91361.
What is the difference between deluge and other fire sprinkler systems?
In a deluge system the water comes out of all sprinkler heads at once, compared with most fire sprinkler systems in which each sprinkler head has its own heat-sensitive trigger. There are major design differences in how much water you need for a deluge system and what safety interlocks are built into the system to prevent accidental water damage.
What is the water flow on a fire protection system?
Depends on the system, and it's design. Most standard sprinkler systems are designed for a 30 gallon per minute rate for each sprinkler head. Standpipes and hose lines have other design criteria, as do deluge systems. They ALL take a LOT of water!
What is a sprinkler system for a house?
A sprinkler system is a device that waters your plants or grass
What is the purpose of a sprinkler head plug and how is it used in a sprinkler system?
A sprinkler head plug is used to block off a sprinkler head in a sprinkler system. It is typically used when a sprinkler head needs to be temporarily removed or replaced. The plug prevents water from flowing out of the system through the open hole where the sprinkler head would normally be.
Will you get a discount on homeowners insurance if you install a sprinkler system?
=== === If its a yard sprinkler, no. If its a fire sprinkler, yes.
How often should you replace freon in home sprinkler system?
There is no freon in a home sprinkler system.
What is a sprinkler loop?
A sprinkler loop is a piping system used in irrigation and fire sprinkler systems that allows water to flow through a series of connected pipes and sprinkler heads. It ensures even distribution of water across a designated area, optimizing coverage and performance. In fire protection systems, sprinkler loops help manage water pressure and flow, ensuring that all areas receive adequate coverage in case of a fire. Proper design and installation of sprinkler loops are crucial for effective water delivery and system efficiency.
What is the function of the sprinkler system control valve?
The function of the sprinkler system control valve is to regulate the flow of water to the sprinkler system, allowing for the system to be turned on and off as needed to water the designated area.
What is the purpose of a sprinkler system blowout adapter and how is it used to winterize a sprinkler system?
A sprinkler system blowout adapter is used to remove water from a sprinkler system to prevent freezing during winter. It is connected to an air compressor to blow out any remaining water in the system, ensuring that no water is left to freeze and potentially damage the pipes or sprinkler heads.
How does a sprinkler valve work to control the flow of water in a sprinkler system?
A sprinkler valve works by opening and closing to control the flow of water in a sprinkler system. When the valve is open, water is allowed to flow through the system and reach the sprinkler heads, which then spray water onto the desired area. When the valve is closed, water flow is stopped, preventing water from reaching the sprinkler heads. This allows for precise control over when and where water is distributed in the sprinkler system.
