drop either..........
A lump of concrete on it
A piano on it
Another Pillar drill on it
actually forget the piano!!!!!!!!!!!!!!!!!!
A pillar drill is another name for a drill press. The biggest hazards are objects getting wrapped around the chuck, and debris or projectiles being thrown. So long hair, ties, and loose clothing should be avoided, eye protection should be worn, and your work should be securely clamped to the work area. Other hazards could include drilling oneself, being injured inside the gearbox, or starting a fire. So you should keep all body parts from around the chuck and pulleys while the drill is in operation. You should be careful to not let your work get overly hot, not operate the press in the presence of flammable vapors, and not overload the outlets.
Pillar Drill Safety Rules. -Tie long hair back. -Goggles and guards must be worn when using machine. -Only on eperson using drill. -Remember to clamp work when drilling. -When in use non users must be 1 meter and away from machine. -Drilling metal always needs a center punch mark and wood will benefit from one.
edwin drake
Answer this question…Seed drill
There are special drills that are made specially for drilling many types of glass. They work perfectly well on mirrors. For the best results you should drill from the back of the mirror, this reduces the chance of the reflective coating from splitting away from the glass.
A pillar drill, can be an industrial drill or a DIY hand drill, standing on a single vertical post (THE PILLAR) and a mechanism to lower the drill to the workpiece to drill a hole.
they drill
The motor on a pillar drill is usually under the back of the belt casing.
chuck
The drill chuck
A pillar drill can cut through almost any material if the speed is correct and the appropriate drill bit is used.
a pulley gearing is the top of a pillar drill and it helps to pull down the chuck.
In The drill press, which is also often referred to as a pedestal drill, a bench drill or even a pillar drill, was invented in 1895 by an engineer from Germany. His name was Wilhelm Emil Fein.
A drill machine can mean a hand held electric drill, or a bench drill press or a pillar drill.
A pillar drill is just another term for a floor mounted drill press
Depending on the type of drill BIT, it may drill through almost anything.
A pillar drill is a machine that drills holes into plastics. It only does circles so you need a coping saw to make the shape.