step 1 - phrase your question so it makes sense. step 2 - include meaningful information. step 3 - follow instructions from answer that was derived from a non-gibberish question.
wheres the light
how do you install your python 1400 xp car alarm
488P Is the remote to a Python car alarm, need to be more specific on the alarm you have.
Put your seatbelt on. Should be an easy fix.
You can not disable the factory alarm. It is built in as part of the computers. If it is a aftermarket alarm you should be able to remove it and put the car back stock.
I have a 1995 Toyota Paseo I changed the battery on the car and buitl in alarm would not let me start the car it flashed light and kept buzzing had to undo battery.. Does anybody know how to diable the built in alrm system?? Try putting the key into the driver's door lock and turning the keu to the extreme left then right. Some cars have this and the owner never even knew that they had an alarm system.
To Diable: The Jeep dealership states that there is no way of disabling the factory alarm for this model. To Diarm: If a remote is not available or doesn't work: stick the key in the door and turn it, if that does not work disconnect the battery for about 10 minutes. Reconnect the battery and try the key again. Hopefully this works for you (only worked half the time for me).
close the drivers door leaving it unlocked, lock it with your key, then unlock it
If you set the alarm (i.e. lock the car) and then disconnect the battery, the alarm will go off. If you disconnect the battery when the alarm is not set (i.e. when the car is unlocked) the alarm will not go off. (So don't try to nick a locked one).
If you know for sure that the alarm is functioning correctly, but the key-fob doesn't operate - either the fob is faulty or the battery is flat. Replace the battery - if the fob operates the alarm, then the battery was flat. If the alarm still doesn't operate, then the fob is faulty. You can always test the battery with a multimeter - although you may have to dismantle the remote to get at the battery !
Disarm the alarm before removing the battery.
The most common cause is that the rechargeable battery in the alarm siren is failing, giving a low voltage to the alarm system. When the voltage from he battery drops below a certain level the alarm system thinks someone is trying to disable the alarm by disconnecting the battery. As it thinks someone is trying to disable the alarm, it sets the alarm off.