GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.
Inside the fuel tank.
if im not mistaking the controls on the radio.to change the settings
Go there, it is explained: http://wiki.answers.com/Q/How_do_you_overide_the_theftlock_system_on_a_GM_car_stereo_My_father_passed_away_I_replaced_the_battery_and_dont_know_the_code._Tried_a_couple_guesses_and_it_went_from_LOC_to_UnOP_code_Help
have the ignition check to see if its worn. if the theftlock/passlock system doesnt recognize the key it wont let it start
Sorry, it would be improper to answer this question that could help a car thief
Trouble code P0125 means:Insufficent coolant temperature for closed loop fuel control
Put the key in the hole?
My system has locked up as well, after repairs. If you have code, you can disconnect battery to reset entry screen. If you don't have code you have to go to dealer. Local dealer said there is two different radios in that year. They can fix one for free but the other has to be connected to a machine. But they can disarm it.
Disconnect vehicle battery ground cable from battery and wait 10 minutes. The system will now be disarmed to make repairs.
when i got into the car to start it it wouldn't even try nothing it had power to everything else and a new battery it just flashed security what can i do to disarm the security system
Don't do that!It's a major mistake to do that!The airbag is a safety device.
what alarme is it find the wiring digram and remove the fuse