Want this question answered?
The 1993 Ford Ranger does not have an alarm override but. You can override the alarm system by removing the alarm system fuse.
disconnect and reconnect the battery
Remove the alarm, i did the same in my altima,the alarm box is located under the dash by the steering column, is a little black box, disconnect the terminal and you will be ok.
I am researching this myself due to a faulty alarm that keeps me from starting my own car. As soon as I get the answer I'll pass it along.
Contact the dealer.
how do you install the passenger front window of a 1993 infiniti g20
1993 Infiniti G20 does not have a hydrolic clutch! It has a cable, that runs under the intake stuff.
I did a tune up on my 1993 infiniti g20 2.0 and now it wont start,what is the problem?
this when help me open the hood on the right side of the radiator has a module or relay it sayz csi pull it out and what a couple of seconds then put it back in then try check your alarm it should workby chris from Hawaii alohaAnswerI have my 1993 Mazda in the shop right now because of the anti-theft system going off all the time. I have to disconnect the battery to stop it. They told me you cannot disconnect the system for some reason. I have looked in my manual and cannot find out how to disconnect it either. If someone knows the answer, I would love to hear it. Thanks Cheryl
how do you disarm anti-theft in a infiniti g20 1993.5 Infinity G20 alarm removal / disengage /disconnect. Pulling the wiring connection off of the theft module cured my problem, who needs an alarm on a 1993 car anyway? The alarm mode was on with dead key FOBS and no way to reset it, horn beeping, would not start, and the alarm would not turn off with the key or remote. 1. disconnect battery 2. disconnect theft module, the theft module (black box the size of a pack of cigs) is located next to and right of the steering column next to the flasher module (turn flashers on and you can feel the flasher module pulse). It is tucked up under, but the push tab can be reached as you pull the connection out, I took the steering column cowling off and the metal dash shield so I could get at it better (a few screws and bolts., no big deal) 3. assemble dash 4. connect battery
The easiest way to disable your 1993 Buick factory alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
To Diable: The Jeep dealership states that there is no way of disabling the factory alarm for this model. To Diarm: If a remote is not available or doesn't work: stick the key in the door and turn it, if that does not work disconnect the battery for about 10 minutes. Reconnect the battery and try the key again. Hopefully this works for you (only worked half the time for me).