If you look closely you will see a red tab on the connector, this prevents you from being able to disconnect it on purpose or more importantly, by accident. Slide it out of the way and you will be able to separate the connector.
# Disconnect negative battery cable # Raise and support truck on jackstands # Carefully disconnect the electrical connector from the sensor and unscrew the sensor from the exhaust pipe
Oil in the electrical connector end is an indication of a failed sensor.
If you have an electric side mirror you have to remove the door panel then unplug the electrical connector and then remove the screws that hold the mirror.
No, the 1994 has a hydraulic governer. The 1998 has a electrical governer.
Easy to find. Just look under the glove box. It has an electrical connector and is held in with two phillips screws. Often is just needs a terminal cleaned not replacement.
There are a few ways to set the timing on a 1994 Suburban 1500. Disconnect the connector firewall to loosen the distributor turning just a bit clockwise.
To reset an alarm on a 2001 Dodge Ram 1500, disconnect the battery cable for 10 minutes. Users can also disable the alarm by inserting the key into the door.
scan tool or a battery disconnect.
On my 95 pickup ,on right side of steering wheel under dash.
disconnect rag joint.
Disconnect battery for 5 min. You need a scan tool.
disconnect the battery, un bolt the starter and replace it then connect the battery