Just disconnet any one of the wheels abs sensor connectors
To reset the ABS light on a 1995 Nissan Pathfinder, disconnect the battery for 10 minutes. A Nissan dealer can also reset the light with a computer.
antilock brake system malfunction sensor in wheel probably out of spe or simialar have abs looked at by a qualified technician
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.
With the ignition off, ground terminal 8 on the data link connector. Turn on the ignition and the ABS warning light light will then begin to flash any codes stored. See the Chilton or Hayes manual for the Xterra to confirm which terminal is number 8. There are pictures and the related procedure in both these books.
When the ABS light is on it is for a reason, a sensor could be bad, or another major problem. The light wont go off until the problem is corrected or until the light burns out
How do you disconnect the ABS in a 1996 Lincoln Town Car
The ABS light is on because there is a problem with the ABS system. Until the problem is fixed the ABS light will remain on and the ABS system will not function if needed. Once the problem is repaired, the ABS light will reset itself.
If you disconnect the ABS module, the system will default to conventional brakes, but the ABS light will be on.
You could, but the ABS light will stay on.
Pull the fuse, but the abs light will remain on.
Remove the abs fuse under the hood in the fuse box
If you want to just disable the ABS then you can pull out the fuse for the ABS relay. The only thing is the ABS light will show on the dash.