0
How do you disconnect the pull out hose from the bottom of the faucet?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you replace a pull out hose a faucets?
It connects to the faucet under the sink. Depending on the manufacturer, it may screw on, have a hairpin clip holding in it or push into the faucet. You remove the last type by pushing the hose in just slightly and holding it there then push in the ring around the base of the hose into the faucet and pulling the hose out. To replace this type, just push it into the faucet till it bottoms out.
How do you disconnect a heater hose on a Chevy Silverado?
You need a hose release tool that can be brought a most auto parts. put on at end of hose connection and pull towards hose, It will go into the fitting and release the tangs that hold it to the barb.
How do you drain your above ground pool with a garden hose?
Siphon it out. You can create a siphon by either sucking really hard on one end of the garden hose while the other end is under water, or the easier way, with 2 garden hoses as follows: -Get 2 garden hoses. Hook one to the spigot, put it in the pool and turn it on. set the other hose up with one end in the pool, and the other wherever you want to drain the water to. -Hold the ends of the 2 hoses that are in the pool, together with your hands, so the spigot water runs through the 2nd hose. Pull them apart, and you will feel the suction pulling the water out of your pool through the empty hose. -Take the hose that is connected to the spigot, out of your pool, and turn the spigot off. -Make sure the other garden hose does not fall out of the pool, or you will lose suction and have to start all over again! -When you get towards the bottom, you will have to physically hold the hose and move it around to get the water out without losing suction. You have to have the end of the hose that the water is running out of below the level of the bottom of the pool. You can do it with on.y one hose. Put one end of the hose in the pool and connect the other end to the faucet and turn it on until the air is forced from the hose. If the faucet is below the pool just disconnect the hose and lay it on the ground. You can move it around as long as the end of the hos estays below the top of the water. If the faucet is above the water level have someone put thier finger over the end of the hose in the pool while you move the end of the hose to a spot below the bottomof the pool.
Where is the antifreeze drain plug on the radiator of a 2001 Ford Focus SE?
theres not pull the bottom hose.
How do you drain the radiator on a 1999 Dodge Dakota?
Unscrew the drain plug, or pull the bottom radiator hose off
How do remove plastic heater hose connection at firewall?
It take a special tool to release the hose connector. I went to O'Rielly and they show me the Dorman Quick Disconnect replacement part ($6.29) and the Disconnect tool set ($19.99). It took the 3/4" disconnect tool to release the broken hose connector on my GMC truck. Snap on the 3/4" disconnect tool onto the heater core tube, then slide the tool into hose connector to release the dog ears inside the connector. Then pull the connector off. It took me about 30 second to remove the disconnect once I had the connect tools.
How do you change the flame trap on a 240 DL 1989 Volvo?
On top right in front of the fuel injector closest to the firewall. Has three hose connections. Big hose on top, little hose on the side and a medium hose on the bottom. Take off the little side hose first since the fitting breaks off easily. Then pull out of the bottom hose and top hose. Clean or replace.
Can you pull the starter of a 1999 cougar from the top or bottom of the car?
its easier to pull it from the top just remove some of the coolant hoses and the intake hose and you can manipulate it out in about an hour
Where is the radiator drain plug located on a 1990 Subaru Legacy?
if it has one , drivers side bottom if not pull the lower hose
How do you remove the battery on a 1998 Cadillac Deville with radiator hose above back corner?
disconnect negative then positive remove rubber hold down and pull out
How does one apply a pull out kitchen faucet?
Installing a pull out kitchen faucet is really just as simple as installing any other standard faucet. The only real difference is that the faucet itself has a feed in line which connects to the water source inside the base cabinetry.
Where does a intake air temperature sensor go on a 2002 Chevy Malibu?
the intake air temp sensor, goes in hose from air cleaner to throttle body!! disconnect electrical connector at sensor, then pull sensor from hose.
