Menards sells plugs that you put through the hole and on the back side is a threaded piece and you put a nut on the threaded piece and it holds it in place. It has a gasket so it wont leak. On the front its a round trim piece that looks like metal.
For fiberglass, a drill and metal holesaw.
get a drill and some god nails
You can drill a hole in the side of anything with the right drill.
you can cut a hole in wood using a special drill attachment. alternatively you could drill a hole then cut a hole with a jigsaw
If you want it to grip, drill a 9/64 hole. For a clearance hole, drill 7/32.
The rotating action of the drill bit makes the hole.
slot drill on milling machine
by using a drill
With a drill
drill a hole in your skull and poke your finger in drill a hole in your skull and poke your finger in
Masonry refers to brick and cement. If you have to drill a hole in that kind of material, just put the masonry bit in your drill, and you can drill the hole in exactly the same way that you would drill a hole in wood, it works the same way.
Yes, but not with the usual drill bit. Drilling a hole in glass is accomplished with an abrasive that actually wears a hole through the glass.
It is not a drill bit, it is called a Tap. You drill a hole slightly smaller than the Tap and then screw it into the hole.