0
Best bet is to go to an Audi/VW dealership, and have them reset the radio by using a VAGCOM. The other option would be to purchase a VAGCOM yourself (http://www.ross-tech.com/). Of course if you have the actual reset code, you can enter it in manually. I can't tell you specifically how to enter it on the Audi radio, since I have an Audi Navigation system, and the controls are different. But it should be a combination of using Volume and Seek (or other keys the would allow for scrolling) to enter in the code.
What else can I help you with?
Reset radio code in 1997 Audi a8?
To reset the radio code in a 1997 Audi A8, you typically need to turn on the ignition, then turn on the radio. If the radio displays "SAFE," you will need to enter the correct code. This code can usually be found in the owner's manual or provided by an Audi dealership. If you don't have the code, you may need to contact a dealership with your vehicle identification number (VIN) for assistance.
How do you reset radio code on 1999 Audi concert radio?
unless you have the 4 digit number you cant...a visit to Audi is the only way
How do you find the code for your 1998 Audi a4 Audi concert radio?
http://www.ibiblio.org/tkan/audi/radios/concert.html
How do you unlock the radio system in an Audi A4?
In the Audi booklet there is a number u must enter or call Audi dealership with Vin number
How do you reset the Audi raido code when it says safe 2?
To reset the Audi radio code when it displays "SAFE 2," you'll need to enter the correct security code. First, turn on the ignition but keep the radio off. Then, hold down the "TP" and "RDS" buttons simultaneously until "SAFE" appears. After that, use the radio preset buttons to enter the code, followed by pressing the "TP" button to confirm. If you don't have the code, you may need to consult your owner's manual or contact a dealer for assistance.
How do you reset the clock on an Audi a4 1998?
To reset the clock on a 1998 Audi A4, turn on the ignition without starting the engine. Press and hold the "Set" button on the radio or clock display, then use the tuning knob or buttons to adjust the hours and minutes. Release the "Set" button once the correct time is displayed, and the clock will be reset. Make sure to check the owner's manual for specific instructions, as the process may vary slightly by model.
1993 Audi 100 stereo safe codes?
Your safe code for your radio is unique to the vehicle. You can go have it reset at an Audi dealership for $20-40 dollars.
How do you enter radio code on 1999 Audi A8 concert radio?
To enter the radio code on a 1999 Audi A8 Concert radio, first turn on the radio, which will display "SAFE" if the code is required. Press the "TP" button to enter the code mode. Use the radio preset buttons (1-4) to input the code: each button corresponds to a digit. After entering the complete code, press the "TP" button again to confirm, and the radio should unlock and start working.
How do you reset radio after changing battery for Audi A6 1999?
You have to call your nearest Audi dealership and address your problem to them. Have your VIN (Vehicle Identification Number) ready. They will ask you for it. If the radio is not originally from the car, you will have to have the serial number to the radio ready. They will after tell you the code via phone.
How do you enter the radio code on a 2000 Audi A4 Quattro?
To enter the radio code on a 2000 Audi A4 Quattro, first turn on the ignition and the radio. If the radio displays "SAFE," press the "TP" button to enter the code mode. Then, use the station preset buttons (1-4) to input the code by pressing the corresponding button for each digit. Once the code is entered correctly, press the "TP" button again to confirm and unlock the radio.
How can you get your Audi A6 radio off safe mode?
You need your operator's folder. In there is a booklet about the radio. it will have a code you need to enter to get the radio out of "safe" mode. the code is unique to each radio and car.
Where is the Audi flasher located?
1996-2001 Audi A4 1998-2005 Audi A6 1997-2003 Audi A8 The flasher is located on the dash above the radio, it is te same unit as the hazard switch.
