Obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 thru 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
on the comand for radio enter your code
in order to get the radio code you must first take out the stereo and get the serial number off the back of the radio then call a Honda dealership with the VIN and proof of ownership and they can get you the code. You then enter the code using the preset buttons. GOOD LUCK!!
How to enter your2003 Acura tl radio unlock code
Leave the radio turned on in this condition for several hours. Then enter a proper security code for your radio. If you don't have the code, you will need to contact a Volvo dealer.
Enter the code with the preset buttons on the radio.
First you will need to get the radio code......i went to a Honda dealership to get mine. turn you radio on and enter the code with your numbered presets. The code will only have the numbers 1-6, it's pretty simple. Keep that code on hand cause you'll have to enter it anytime your battery may go dead.
Use your radio Pre-Set channel to enter code
In order to enter the radio code 1992 Ford Laser radio, you need to do the following: Locate the car radio serial number Visit the website for the Ford Radio Code website Enter the serial number, the model, and the year of the Ford Laser radio Submit the information and the radio code will be displayed Enter the code into the Ford Laser radioOnce you have entered the code, you should be able to access the radio again. Make sure you write down the radio code so you don't have to enter it again in the future.
With the radio presets
If you are asking about the radio unlock code you enter it with the radio preset buttons.
Use the radio preset buttons to enter the code after turning the ignition on.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3