If you know the voltage being supplied, divide that into 500kVA. For example for 120 Volts the amperage would be 500,000/120 = 4166.66 Amps.
A zener diode with a rating of 500 mW will pass 50 mA at 10 V. (Power = voltage times current)Note: The question appears mis stated, in that it states a rating of 500 MW, not 500 mW. To my knowledge, there is no zener with a rating of 500 MW.
It means that the charger is built to be used together with a battery that has a 500 mAh (500 milli ampere hours) capacity.
The same number as 250 Oranges is apples. A watt is a volt times an ampere.
The engine horsepower rating was 500 hp or better
The question is incomplete without the voltage across the resistor. For example: if V (Voltage across 500 ohm resistor) = 5 Volts, then, Current, I = 5/500 Ampere = 0.01 A.
500 hp
89.
I have a 2005 Sportsman 500; in my manual, I could not find a horsepower rating. However, I did find these numbers: towing capacity is 1224 pounds, the front rack weight capacity is 90 pounds and the rear rack capacity is 180 pounds. I know that these are not the horsepower numbers you were looking for, but I thought I would share them in case you are looking to haul and tow with your quad.
horsepower rating specifications for 1983 Honda vt 500c shadow
Welding is done with a high current and low voltage. The voltage of a 500 amp welder might be 10 v so the power rating in that case would be 5000 watts.
The same number as 250 oranges is apples. A watt is a volt times an ampere.
Milliampere-hour (mAh) is a unit of electric charge, while ampere (A) is a unit of electric current. The relationship between them is that 1 Ampere = 1000 milliamperes. So, 1 ampere-hour (Ah) equals 1000 milliampere-hours (mAh).