GU6 Axle ratio is 3.42 according to the RPO code
gm4 3.67
10 bolt or 12 bolt has NOTHING to do with gas mileage. It is the gear ratio that is inside of the rear end housing that affects the mileage. The lower the gear the lower the fuel mileage is. The higher the gear, better the fuel mileage is.
yes it does come with a 12 bolt 8.5" rearend but im not 100% sure on it But i beleve it does come with a 3.73 ratio the only real way to find out is to turn the driveline and count the turns until the tire rotates once
as long as the ratio is the same you can.
The gear ratio of a train, also known as its speed ratio, is the ratio of the angular velocity of the input gear to the velocity of the output gear. The gear ratio is very important when it comes to physics.
Incorrect gear ratio in first gear.Incorrect gear ratio in first gear.
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
The ratio is the driven gear divided by the driver gear. This determines the gear ratio.
Supply the vehicle identification number to the nearest dealer and he/she can tell you what ratio you have.
Where the speedometer cable attaches to the transmission, that piece should have a clip holding it in the transmission. The clip should be held in with one 1/4 inch bolt. Take the bolt out and the gear pulls straight out. Check the number of teeth on the new gear they can be different depending on rear end gear ratio.
a 10 bolt differential case has a 8.5 ring gear .a 14bolt has 2 different covers one is a 9.5 the other is a 10.5
Gear ratio of bevel gears isnumber of ring gear teeth divided by number of pinion gear teeth.