Want this question answered?
Light bulb in the home - alternating current (A/C) Light bulb in a car - direct current (D/C) Output of a battery charger - direct current Input of a battery charger - usually alternating current
It can, but if you're wanting to run a 120v light bulb on DC, you'll need 120v DC to get the rated output. That's a lot of batteries. It's easier, and more sensible, to find a DC rated light bulb, such as an RV bulb.
Find out what the wattage of the bulb in the fixture is and you will have your answer.
LED light bulbs are pretty difficult to find in high luminosity standard bulb power levels, but they are simple to find for smaller needs like desk lamps, opening up a great light bulb power saving opportunity.
Output Power divided by Power Factor.
Look on the light bulb for the voltage and the power in watts. Then divide the watts by the voltage and that gives the amps. Some CFL bulbs also state the current as well as the voltage and power, which is because they can have a poor power factor.
No. I am assuming that you first replaced the bulb? If you did replace the bulb, then I would check to see if you are getting power to the bulb socket. If no power is getting to the socket, you then need to find the break in the electric lines going to the socket.
Ge894 should be the bulb
The unit of measurement used to find the power of the bulb is watts. Voltage is the flow of electricity, so make sure not to confuse the two.
by using tester
A watt is a measurement of electricity, usually pertaining to light. Light bulbs luminosity is graded by wattage, such as a 60 watt bulb, 100 watt bulb and so on. You would find a watt in a light bulb, to start.
which light bulb are you talking about?