Want this question answered?
bring it to your local mechanic
how do you change a radio casset for cd radio in a bellingo van 2005
Fuse for cigerette lighter and electric mirror . Thanks Wayne
Put in Berlingo springs, they are taller and harder, but will fit.
yes
i want to change the fanbelt on my vectra 2001
its fairly straight foreward. remove serpentine belt. support engine. remove top engine mount. remove bottom pully(normally 4x10mm bolts). remove timing covers(3of). turn engine to line up marks( cam is at 3o'clock, pump is at 12o'clock, crank needs marking with tippex when other 2 are lined up). slacken tensioner(13mm bolt). remove belt. fit new belt anticlockwise to leave the slack on the tensioner side. tighten tensioner. now fit parts in reverse order. thats it, job done. if belt is too tight it will make a howling noise. i can do one from start to finish in 18 mins. good luck.
what one
At the back of the lamp, take the air filter pipe out, then when that is out of the way, remove the black 3 inch round plastic bulb cover by unscrewing it. Inside there, you will have to stick you fingers in and pull a holder out and it is has a push fit lamp quite a bit of a game mind.
Does a 2001 Honda Accord DX 4 cylinder have an interference fit motor? Thanks in advance for any help. Oh yeah, what I am getting at is if the timing belt snapps will the mor be destroyed or not.
just a ratchet to fit onto the tensioner. crank the tensioner counter clockwise and it'll slack the belt.
fit vw polo alternaor belt