Want this question answered?
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode Trouble code P2112 means: Throttle actuator control (TAC) system actuator stuck closed
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
Trouble code P2106 means: Throttle actuator control (TAC) system-forced limited power mode
P2175 Throttle Actuator Ctrl Sys-Low Airflow DetectedThere is a malfunction with the electronic throttle system.P2175 Throttle Actuator Ctrl Sys-Low Airflow DetectedThere is a malfunction with the electronic throttle system.
Trouble code P2111 means: Throttle Actuator Control System - Stuck Open
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
P2112- Throttle actuator control system stuck closed. The throttle on your vehicle is not controlled by a cable but by a actuator motor in conjunction with a sensor inside the accelerator pedal. This fault indicates there is a problem with the throttle side of the system. The throttle is either binding, slow to respond, completely stuck or has failed. Other possible causes include problems in the wiring (open/short circuit) faulty connection(s), or battery voltage problems could also cause this. I would try checking the connections to the throttle actuator, and if you are up to it carefully clean the throttle to see if you can save it. Good luck!
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode
Trouble code P2106 means: Throttle actuator control (TAC) system-forced limited power mode
Trouble code P2110 means: Throttle Actuator Control System - Forced Limited RPM
You could clean the throttle body or check what else I found...P2104 - Throttle Actuator Control (TAC) System - Forced IdleP2112 - Throttle Actuator Control (TAC) System - Stuck Closed.P2104 was set because the pcm had to step in to set the idle. The TAC system is in the failure mode effects management (FMEM) mode of forced idle. P2104 is just an informative code, set because of P2112. P2112 possible causes: Binding throttle body, stuck closed orDamaged PCM