Want this question answered?
You must replace the piston rings. That means TIME FOR A REBUILD.
Take it to a mechanic.
Unplug your USB chord. Blow in the spot you put it in. Place the USB back into the spot.
Put the Bypass Valve back on!
If it is coming out around the top of the stick, you have either a plugged pcv valve/crankcase orifice tube or excessive engine blow by. Blow by is the normal leakage past the piston rings. Excessive blow by will require a new/rebuilt engine.
run gear oil in your engine if your cheap cause a 20r engine remanufactured cost 600 dollars. or you could completey take the motor apart and replace the rings.
Blow dry it.
Disconnect the wire at the starter and try the ignition. My guess is that the starter itself is the problem. If the fuse does not blow then it is the starter, if it does blow then go to the relay center in the engine compartment and check the starter relay. Work your way back to the ignition switch.
your engine is overheating, change your thermostat first, if that doesn't fix the problem check the rest of your coolant system (hoses, lines, core, radiator,ext.)
You simply take it out of the gamecube, shake it, blow in it, and wait a few seconds. Then put it back in and it should be fine
no
The answer is a Pineapple!