You must replace the piston rings. That means TIME FOR A REBUILD.
3/8-16x1 1/4 grade 8
Need to know the YEAR and what it is in, So I can answer your question are help you fix it.
check to see that the fuse to it didn't blow.
the short wont be on the fuse you need to find out what is shorting out and causing the fuse to blow
how do i fix a dtc code 42 in a 1995 chev 6.5 diesel?
An engine needs three things to run, fuel, timing, and spark. Check spark first (it's easiest) pull a plug and crank the engine. If spark isn't your problem check your fuel fiter, pump, etc... Fuel is the next most likely and easiest to fix. Good luck!
There is no fixing it, replace it with a new one.
with scan tool but you must fix the problem to keep it from comming on .
First you need to check and see if there are any codes thrown by the PCM,if there are start your diagnossis there.
If it is coming out around the top of the stick, you have either a plugged pcv valve/crankcase orifice tube or excessive engine blow by. Blow by is the normal leakage past the piston rings. Excessive blow by will require a new/rebuilt engine.
run gear oil in your engine if your cheap cause a 20r engine remanufactured cost 600 dollars. or you could completey take the motor apart and replace the rings.
Blow dry it.