Remove the broken bolt and replace it with a new one. There are several ways to remove that broken bolt. You can remove the valve cover and weld a nut to what is left of the bolt, wait for it to cool off then unthread the broken bolt. You can also drill out the center of the broken bolt and use an easy-out. You can also drill into the broken bolt with a left handed drill bit, sometimes the drill bit will catch and spin out the broken piece. I would go with the first suggestion.
It will be on the back top of the drivers side valve cover.
17 ft/lbs.
90 inch lbs. = 7.5 ft lbs
The EGR valve on a 1994 Chevy 1500 is located on the top of the engine. If the valve becomes stopped, the engine could idle rough or stall.
Where is the transmission modular valve located on my 1994 Chevy 1500 pickup truck
Where is the vent vale solenoid on a 2006 Chevy silverado 1500 4.8 L
No there is not.
The fuel pressure relief valve is located Under the Plastic cover on the fuel rail.
The PCV valve on a 1992 Chevy 1500 350 is located on the intake manifold which is on the passenger side of the vehicle and to the right of the throttle. It has two bolts that hold it in place.
It is on the left side of the TBI Throttle body, and it screews into the side of it. with a electric connector plug on it. ( Idle speed control) The EGR valve is on the lrft side of the intake manifold, close to the valve cover.
That year model did not have a modulator valve on the transmission.
Hey Minnie==Trace the fuel line from the tank toward the engine and you should find the filter about midway. The pcv is in the right valve cover. GoodluckJoe