it would be better to buy a piston kit. It wouldn't be a good idea to try to fix a cracked piston.
you don't fix piston rings. if you have bad rings you have to pull the piston and replace them. on most vehicles you have to pull the engine, then you take off the heads and oil pan. unbolt the caps from the bottom of the rod and push it out the top.
To fix the ozone hole, stop using CFC's. They are the ones depleting ozone.
Do you mean piston slap? Noise like piston slap are repairable only by an engine rebuild.
take it to the fix place...................................................................................................................................................................................................................................................................
this is the diameter of the cylinder hole in the engine block for the piston
many countries try to fix the hole. Montreal protocol is a treaty for the same.
You can buy the rebuild kit on ebay ...just remove the head and the piston will still be on rod..remove clip and rod pin...and piston and rings will be in your hands
The best thing you can do is replace the caliper.
Type your answer here... Burnt intake or exhaust valve, hole in piston, broken piston rings, bad head gasket, valve spring broken.
It is measured in cubic inches, cubic centermeters, or liters. It is the area of the bore of the piston and the stroke of the piston. In other words how big that hole the pistons resides in when the piston is all the way down. You multiply that by the number of pistons in the engine.
broken rings,hole in piston,bad valves