start with checking your coolant level/condition. Either top up or change if needed. Inspect lower/upper radiator hose and radiator to see visible leaks. If located replace the component leaking. Check Coolant Temperature Sensor. This webiste will assist you in that http://www.mazdaforum.com/archive/threads/coolant-temp-sensor-how-to-replace-pix-4746-1.html Lastly if still overheating have system pressure tested at a local mechanic. He will check the above things as well as the water pump and head gasket for leaks and proper operation.
buy new motor
Get amanual on your car.
It depends on what is wrong with them
i have a 2000 mazda 626 with a 1744 code. i was able to pull the code but my scanner wont tell me what it is for. what does this code represent and how do i fix it?
with my 95 mx3 i was having the same problem all i did was adjusted the angle of the radiator and the over heating problem stopped id try that
its because you blew the fuse on the illumination just swap it out. same problem
My 1991 Mazda 626 will start and idle fine but when you put it in gear the HOLD light flashes and the car will not move almost as if the tranny is shot but its NOT the flashing hold light indicates that there is an electrical problem with the tranny but my question is is there some kind of reocuring problem with this year and model if so how do i fix it
youtube will tell you. ive posted a video just type in how to fix car antenna
if your not a mechanic stop googling ways to fix your car and take it to a professionial.
Generally whenever a switch goes bad the only thing you can do is replace it.
well trans fluid in all the cylinders will work or a rebuild
IF the system is the same as the Mazda pickups and Mazda Navajo, HeaterTreater has a product that will fix the problem. Mazda diagrams are hard to come by. If you check the pictures on the Ebay listing, you should be able to determine if the fix will work.