Want this question answered?
P2195 - stall at idle after a cold start P2195 - front HO2S signal stuck lean P2195 - may be displayed in case of " stuck rich "
It's an O2 sensor code
http://www.aa1car.com/library/ford_lean_codes.htm
evap leak small check gas cap may not be tight
dtccode.com : Evaporative Emission Control System Pressure Sensor High Input
dtccode.com : Evaporative Emission Control System Pressure Sensor High Input
That means that your o2 sensor is stuck lean (bank 1 sensor 1)
usually that code is a hose off or cracked
might want to check for vacuum leaks. wifes focus has rubber hose from valve cover to throttle body (rubber hose that had a big hole in it). according to a parts guy at the dealer most fords use a setup like this and the hoses are a common problem. good luck might want to check for vacuum leaks. wifes focus has rubber hose from valve cover to throttle body (rubber hose that had a big hole in it). according to a parts guy at the dealer most fords use a setup like this and the hoses are a common problem. good luck
Trouble code P2104 means: Throttle actuator control (TAC) system-forced idle mode Trouble code P2112 means: Throttle actuator control (TAC) system actuator stuck closed
Trouble code P1131 means: Lack Of HO2S11 Switches - Sensor Indicates Lean
Trouble code P1131 means: Lack Of HO2S11 Switches - Sensor Indicates Lean