Want this question answered?
EVAP Purge Solenoid Stuck Open or Closed
The computer on the car purges the evap canister automatically by activating the purge solenoid.The computer on the car purges the evap canister automatically by activating the purge solenoid.
Purge solenoid is on the gas tank along with the evap cannister.
"EVAP System Flow During Non Purge" Most likely the purge solenoid is stuck open. If it is the 4.3 engine the purge solenoid is located on the right side of the intake manifold.
Is this reachable at home for chevy 98 camaro Evap purge solenoid
The EVAP purge solenoid on a 2001 Nissan Sentra GXE is under the hood. It is mounted to the top of the intake manifold.
In the 2001 Toyota Corolla the evap purge solenoid valve is located near the underside of the air cleaner. This is an emissions control device.
The evap purge solenoid is located on the top of the engine. The evap vent solenoid is located in the rear drivers side wheel well, attached to the charcoal canister.
by the tank or evap canister
near the spare tire
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: * Push the large size white retainer portion in. * Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector Remove the EVAP canister purge solenoid bolt Remove the EVAP canister purge solenoid and insulator Reinstall in reverse order....... toque spec is 91 inch lbs
evap. purge solenoid circuit failure