answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: How do you flush sediment from hot water line?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Getting dirt in hot water?

It is probably sediment from the hot water heater, you may need to flush out the hot water heater tank, all it takes is a garden hose.


Can sediment from hot water tank back siphon into cold water line?

YES


Which has more sediment hot or cold water?

Normally Hot


What would cause the cold water in all your faucets to have zero pressure but the hot water pressure is fine?

Lots of stuf can cause it including sediment or a blocked supply line


How can you Flush ice from your system?

Drink some hot water.


Why when you Flush hot water gets hot in sinks and showers?

When you flush your toilet, cold water is used, this diverts cold water from the sinks and showers, resulting in diminished cold water flow momentarily at the sinks and showers, so, less cold mixed with hot, = hotter sinks and showers.


What will stop a water leak on a hot water line?

Repairing the section of pipe that is leaking will stop a leak on a hot water line.


We had a water main break in front of our house this week. Now our hot water is running brown and low pressure . Our HWH is only 2 years old. Could this be the result of the water main break?

Yes. Generally the first place the water line goes to is the water heater. Rust, sediment, or dirt from the break could have got into the line and settled in the water heater. If it is only 2 years old, you should be able to drain it and get most of whatever is in it out. The low pressure could be sediment in the screens of each faucet.


What should you do if you have changed the seat and cartridge many times on your hot water tap in the bathtub and it only lasts for a few days and leaks again?

Only a suggestion...you may try turning off the power, or gas, to the heater and attaching a hose to the tap at the bottom, opening the tap and allowing the tank to "flush out". It's possible you have heavy build-up of sediment and it is being stirred up by the incoming cold water when you use your hot water. Other than the flushing the only other way to clear the tank, if sediment is the culprit, is to turn off the power/gas, drain the tank, and remove the lower element and "scooping" out the sediment with whatever you can fabricate for a small shovel...or use a small vaccum attachment on a shop vac...If all else fails...put a filter in the line.


Why is a secondary circulation used to hot water draw off taps?

...make your hot water reach each tap quicker than if no recirc line is installed.


Is the supply line to the dishwasher the hot or cold line?

Hot water line. If you did hook it up to your cold water line make sure your dishwasher is set to heat the water (some models have a selectable setting for this.)


No hot water in bathtub?

Obstruction in the hot water supply line, bad valve, or broken water line. Drain system and remove valve cartridge, open hot supply to blow out line and see if water comes out. If it does than you have a bad cartridge, if not broken line that needs to be repaired.