What makes it so dangerous is, it can be hotter than 800 degrees Celsius (1500 degrees Fahrenheit). It can flow downhill faster than 160 kilometers per hour (100 mi/h).
Irregular Fluid Flow is called Turbulent Flow! I hope this helped! :D
Steady flow: laminar flow over a sphere. Unsteady flow: turbulent flow over anything.
What is a continuous flow and unsteady flow
Laminar flow hoods and hepa filter must be certified every 6 months. The type of environment that a laminar flow hood provide ISO 5, which is formerly known as a Class 100 area.
No. A pyroclastic flow can move at well over 100 mph.
Pyroclastic flow
Normal flow is 100% of the flow you actually expect. Rated flow is the maximum safety factor times the normal flow. i.e. for a maximum safety factor of 1.2 Normal flow = 100 gpm Rated flow = 1.2*100 gpm = 120 gpm Safety factors are applied to ensure a piece of equipment has some flexibility of operating conditions in its application. The minimum flow is the minimum safety factor time the normal flow i.e. i.e. for a maximum safety factor of 0.5 Normal flow = 100 gpm Rated flow = 0.5*100 gpm = 50 gpm If sized properly a pump specified in this way could operate at any point between 50 and 120gpm with no problems.
More, depending on how long you allow the flow to flow.
100
11000
kidney
in your chat bar type test-mode 42 then writecryptobiologist then each day it will add up even 100 FLOW OR 400,000 FLOW I KNOW ITS CRAZY i hope this helps
300 cfm should do it.
It can take 10 to 100 years --Silvericy
A circuit has an applied voltage of 100 volts and a resistance of 1000 ohms. The current flow in the circuit is 100v/1000ohms which would equal .1.
no its not 100%, just as that superconductive materials arent 100% conductive. But very close.