Ford Bronco

How do you get a window to work on a 1989 Ford Bronco?

737475

Top Answer
User Avatar
Wiki User
2015-07-15 21:17:37
2015-07-15 21:17:37

Turning the window crank in a counter clockwise direction, the window will go down, reverse direction to raise it.

If you are speaking of the rear window the switch is on the a/c control panel. Down makes the window go down and up is up

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

1978-1979 Ford Bronco driveshafts

User Avatar

Yes it should . There is only 2 different ones. It is easy to read the tags. I forget the exact but -----54 or 58. Before you get to durty.

User Avatar

No, the front end of 92 - 96 Broncos is completely different than 87 - 91 Broncos.

User Avatar

Ford is an excellent company with all American values and standards. The Bronco is a sturdy work vehicle. The lack of a bed is the only thing that makes this second to an actual truck.

User Avatar

I have a 91 bronco and I've had problems myself with the rear window. First check the fuse panel to see if the fuse for the rear window is blown. I believe its a 20 amp. Also if the interior switch and the key switch on the tailgate both dont work, try pushing in on the tailgate while trying to move the window down or up

User Avatar

You either have a bad connection or a abad sending unit. Check out the wire to the tank and connection at the sending unit . .

User Avatar

One of the available engines in a 1986 full size Ford Bronco was the 4.9 L ( 300 cubic inch ) straight 6 cylinder

User Avatar

There the same so it should work, although I'd upgrade to a better axle.

User Avatar

i have a 82 bronco as well and i also had the same problem i checked the window motor and everthing was ok so i checked the PLUG in the dash where the switch is and found my problem it was the CONNECTOR it had come loose so i just pushed it back on and pow fixed it .....so try this out if you havent already found and fixed the problem good luck and thanks for your question

User Avatar

Check the switch first by bypassing if the others work. Start there.

User Avatar

www. motorcraft. com ( no spaces ) shows different part numbers for the 1994 and 1997 Explorer window motors

User Avatar

there is a potential danger in the event of a rollover, but otherwise it is great if your A/C doesn't work

User Avatar

Check the fuses on the front passenger side

User Avatar

How to repair power window in 2000 Ford Ranger passenger window will not work with either drivers button or passenger button the relay does not make any clicking noise either What is wrong?

User Avatar

this is the biggest pain i ever had to do when i had my bronco... but its simple, just take the plate off of the inside of the tailgate (tailgate could be up or down, down is easier), find the motor, unplug it and remove the couple bolts that are holding it in. careful not to cut yourself there isn't much room to work. the hardest part is getting it back in. good luck!

User Avatar

It could be a bad switch or the motor that lifts the window up and down is bad

User Avatar

Plastic thing that attaches window glass to the window motor might be broken.

User Avatar

Yes you can but you might to have to cut the driveshaft or get a shorter one just did it this week.

User Avatar

The temp gauge may stop working on an 89 Ford Bronco if it is defective, the temperature sensor is damaged, or the wiring has come loose. All can readily be fixed by checking each component separately.

User Avatar

if it is a ford ranger,it may work because the masda got its body style form ford for that pickup

User Avatar

The general consensus with most performance oriented Bronco owners is that original Ford Autolite or Motorcraft spark plugs work just as well or better than most "performance" spark plugs.

User Avatar

POSSIBLY A LOOSE GROUND WIRE AT LEAST THAT IS WHAT I AM LOOKING FOR ON MINE,GOOD LUCK! The most likely cause on the late 80's Bronco & Ranger for headlight problems is the failure of the Dimmer switch connection. I had to completely replace the connector & switch on my '88 Bronco II to resolve the problem.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.