Want this question answered?
It is inside the engine, driven by the timing belt.
my 93 with a 2.5 uses 3 bolts to hold pulley on the pump
For all 1992 Dodge Dakota V6 andV8 engines:All of the water pump bolts are to be torqued to 30 ft. lbs.For 1992 Dodge Dakota 4 cylinder engines:Upper bolts are torqued to 21 ft. lbs.Lower bolts are torqued to 40 ft. lbs.Waterpump housing-to-cover bolts are torqued to 105 inchlbs.
There are three bolts. 10mm socket
Water pump attaching bolts: 30 ft-lbf Fan-to-water pump attaching bolts: 200 inch-pounds
Yes, all vehicles have the PCV Valve, they cost like 4 dollars, what they do is get moisture and what not out of your engine oil. As we all know, Water and Oil does not mix.
Water pump is located below alternator on passengers side
It is on the front of the engine . The water pump bolts to it.
The 2002 Dodge Durango water pump bolt torque specification is 40 pounds. The water pump bolts should be torqued in 20 pound intervals.
Do not believe there were any Dodge Spirits made until 1989! Dodge Spirits was made from 1989-1995, that's when they was replaced by the Plymouth Breeze and the Dodge Stratus.
The water pump is timing belt driven you got to get to the timing belt to have access.
It is not required, but is a good idea.