usually an ice scraper will work. if this does not work, try dry ice on glue, then use ice scraper to scape off. dry ice will cause old glue to become brittle.
How do you get super glue off your jeans?
you can use another type of glue and stick it to that and get it off?
well 1st if there is any glas get gloves and adust pan.yhen take a towl and lay it down were the spill is if it smells strong still use some kind of cleaner
td {border: 1px solid #ccc;}br {mso-data-placement:same-cell;} Removing glue off your hardwood can be a bit tricky so you need to apply gentle pressure when you are going to do it. It is advisable not to use metal putty knife and then scrub any stubborn sections using a solvent. Soaking a rad with adhesive remover is also a big help to get rid of the stubborn bits of glue off your oak planks or hardwood flooring. :)
Try rubbing the stain off with mineral spirits or paint thinner first. If that doesn't work, you may have to try a chemical stripper that removes the type of finish you applied to your wood floors. Generally, they won't damage the glazing on ceramic tiles, but they may strip color from your grout so be careful.
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
You sweep the floors
Yes, it does . Old tile glue will ball up and mess your job.
Melt it with Goof Off.
you have to sand blast it off
Scrape it gently with a craft knife held nearly parallel to the tile.
Plywood is the best choice between these two. Particle board can swell if water gets to it. You would be better off if you use a tile backer board. Concrete based or a fiber type. They are made for this application.
Acetone or lacquer thinner should do it.
Most glues can be removed from lino with Goof Off. Rub the glue with a rag and a few drops till it loosens.
To replace the decorative tile border on a concrete pool, the pool will have to be drained. The old tile needs to be taken off and a new tile with waterproof grout or concrete can be installed. The pool should dry for a week or so, before it is refilled.
Dip a rag in Goof Off and rub it on the carpet glue, it will soften enough to peel it off.
the sound travels when it reaches carpet it absorbs it but on tile it bounces off