Remove bulb
Remove Bulb? How in the world do you remove a bulb from a digital display? Are you just guessing, or maybe not familiar with the type of display? Yeah like Im going to tear my dash apart on this advice!
If the check suspension light is staying on in a 2000 Navigator, it is probably because some part of the suspension is malfunctioning. This could be that the shocks need to be replaced or a ball joint is bad. Either way, it is a dangerous situation.
You may have mis-aligned the sensor when you replaced it.
I have reolaced them on 3 town cars every time I but a piece of black friction tape over the light or take top og dash off and remove bulb
Get the carbon canister checked out I had same problem after get coils replaced on my clio
Replacing ignition coils will not guarantee that your misfiring codes will disappear nor that it will solve the problem. I had the same problem in my 2000 CE and so far, after replacing spark plugs, wires, coils and testing the fuel injectors haven't been able to fix the problem. However if you want to replace the coils it is rather simple. It has 3 coils located on top in front of the engine. Detach the wires and unscrew the bolts and you should be able to pull them out and replace them in the same way.
If you fix the problem with your air suspension
The cast of Disappear in Light - 2012 includes: Jo Randerson as herself
If a mixture scatters light and does not settle upon standing, it is not considered a suspension. It is considered a colloid.
google it, there will be direction to cut a certain wire to make the light go away. There will be no damage done by doing this.
you may have a bad battery or a bad voltage regulator
A malfunction with the air suspension system has been detected
Shadows are created by a light source, remove the source of light and the shadow will disappear.