Sometimes you have to break it with a hammer to get it out. They can be tough to get off at times. They are suppose to just lift off.
Need to check or replace the ingnition module in the Distributor.
Sounds like the bearings or bushings in your distributor are worn. With the cap off, check for any wobble or play on the shaft. If so replace the distributor.
Is it a brand new distributor ? If not then replace the module and pick-up coil in the distributor that you have.
18463572...
How do you replace the blower motor on a 1994 chevy lumina euro?
In the distributor.
NO
There is a rubber O-ring seal on the distributor shaft. You will need to pull that shaft and replace the O-ring. Fairly easy job. The O-ring will cost you about $1 if you can do the work yourself.
what sort of car and how many cylinders 1994 mazda626 6cyl
It is right behind the distributor, It is hard to get to.
Right behind the distributor and it is tough to get to.
it should be right behind T.B.I unit....just follow your spark plug wires from block to..distributor and there it is....