take screws out and pull door trim off
On a 1997 Ford Explorer : The right side kick panel would be inthe front passenger footwell It is the interior trim panel , just in front of the front door , by the passengers feet
Yes , there was a 1997 Ford Explorer with the Eddie Bauer trim - did you have a question ?
Jaguar or Ford Dealer
E6000
The passenger kick panel is the interior trim panel , just in front of the front passengers door , next to the front passengers feet
On a 1997 Ford Expedition : The fuel pump shut off switch ( inertia switch ) is located in the front passenger footwell , behind ( or by ? ) the kick panel * the kick panel is the interior trim panel , in front of the front door , beside the persons feet
The full size Ford Expedition ( the first model year was the 1997 ) had either the 4.6 or the 5.4 liter V8 engines in North America So , the answer is ( No ) * if you mean the Expedition trim on , say a 1995 , Ford Explorer 2 door , then the answer is ( Yes )
In the front passenger footwell , I BELIEVE it is BEHIND the kick panel ( the interior trim panel just in front of the front door by the passengers feet )
FRONT DOOR TRIM PANELREMOVALRelease door latch and open door.Roll window down.Remove window crank , if equipped.Remove screws holding door trim panel to door from inside arm rest pull cupDisengage clips holding power window/lock switch panel to door trim panel Disengage wire connectors from switch panel, if equipped.Remove screw holding door trim to outside mirror frame.Using a trim panel removal tool, disengage clips holding door trim to door around perimeter of trim panel.Disengage power mirror wire connector, if equipped.While holding bottom of trim panel away from door, simultaneously lift upward and forward.Separate door trim panel from inner belt weatherstrip.Disengage power outside mirror wire connector from control switch.Separate door trim panel from vehicleINSTALLATIONReverse the preceding operation.
The door ajar switch is located on the backside of the door latch assembly, and is accessed inside the door by removing the door trim panel.
The exterior door handle on a Ford Fusion is replaced by first removing the inner door trim, retaining bolts, and window knob. The door handle can then be unbolted from the frame and a new one put in its place.