Try turning on the button on the left of the ceiling console. Had the same prob myself.
I've got a better question, why is this question in the Chevy venture forum ? I think the sliding switch underneet the on/off switch for lights is fully in the left position.just slide it to the right.
There are no lights. their just reflectors.
did you check the bulb if it is not that it could be the plunger on the door jam is just stuck or bad If so equiped, you have a switch in your overhead switch group that disables the interior lights until you enable them again.
Press dome override button 3 or 4 times till you here a beep to put headlights and interior lights back on auto
make sure ALL the doors are closed
If the interior lights do not come on it could be because the bulbs burned out. It can also be because the fuse blew out as well.
I believe if you turn your gauge panel dimmer switch all the way it turns on the interior lights when all the doors are closed
Yes. I have a 2004 Suburban with barn doors and I put these LED tail lights on them.Just do a Google search for Anzo 311003
First verify that you do not have the interior lights switched on using the panel (instrument illumination) dimmer switch. Verify that door switches are working normally and doors are closed. Then, if all of that is well and you do not have any damaged wiring, replace the BCM. Also, you could pull the fuse out, but then you wouldn't have any interior lights. Ditto if you pull the bulb out.
Check switches on doors for proper operation. they are usually adjustable.
check either end of the dash when you open the doors the fuse panel doors are the pull type
In the upper console above the windshield where the two lights are located there is a rocker switch giving the option of On, Off and with Doors.