0
How do you get the piston back in on the brake caliper on a honda civic?
Wiki User
∙ 11y ago
If you pulled the piston all the way out,make sure you lube the cylinder bore with brake fluid, not oil! Petroleum products will degrade some parts of the brake system.
Twist the piston as you insert it, that way you will stand less of a chance of getting it cocked in the bore. The rubber boot or dust cover may get in the way.
Bottom out the piston in the bore so it is easier to put the brake shoes on and, having done that and before you drive away, pump the brake pedal several times to fill the cylinder with brake fluid and seat the brake shoe against the rotor.
If you are putting on new brake shoes and just need to push the piston back in the bore, the best way is to use a 4 inch "C" clamp - about 10 buck at an auto parts store
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you change front brake pads on a 2002 Honda civic?
To change front brake pads on a 2002 Honda Civic raise the vehicle and safely prop it up. Remove the front wheels and caliper. Take off the old pads. Decompress the caliper piston and insert the new pads.
How do you compess the rear brake caliper on 1997 Honda Civic?
the rear pistons have to be screwed in to get them back into the caliper. this is because the emergency brake is built into the caliper you can rent a caliper return tool or be careful with waterpump/channel lock pliers and turn the piston, it will start to retract into the caliper when you are done make sure the grooves in the piston are in the correct position 12 and 6 o clock as you will notice the is a pin on the inner brake pad that must seat into the piston. once job is done pull the e brake up and down 10 or more times this will return the pads back to adjustment
How to change the rotors on a 1991 Honda Civic?
To change the brake rotors on a 1991 Honda Civic raise the vehicle. Remove the wheels and brake caliper bracket. Remove the brake pads. Loosen the rotor mounting screws and replace the rotors.
How do you change the rear brake pads and depress the piston on the caliper on a 2004 Honda accord 4-D EX with disc brakes The rear caliper and the emergency brake are one unit and what tools.?
screw it in turn the piston clockwise and screw it in , only for rear brakes
Honda Cr85 brake pads replaced and caliper is not working?
first try bleeding the lines, as you may have gotten air in the brake lines. second, you could take out the piston out of the brake caliper and put it back together, checking that it works.
How to change rear brake pads on Honda civic 2003?
After looking at pictures of the Honda CRV's rear brakes. A pad change appears to be a process of removing the two caliper support bolts, removing pads, turning in the caliper piston (special tool required). You may be able to use a needle nose vice grips to retract the piston. Then replace pads and any shims, fit pads and shims inside caliper housing, Clean and relubricate the caliper bolts (pins) and fit back onto rotors. I'll be doing a brake job on a 2003 Honda Crv tomorrow, and will let you know what I find
Honda Civic brake lights stay on?
Brake light on 1994 Honda civic staying on.
How do you fix rear brake lock ups on a 1994 Honda four wheeler?
You need a better question.... If its rusted to the rotor use PB Blaster to free it then replace brake pads. If the caliper piston is frozen then you need to rebuild the caliper.
How do you move the piston back when changing rear brake pads on a Honda prelude 2.2 vti-r 93?
If parking brake is operated through service brake--then piston is threaded into caliper body--special tool is needed (not expensive) available at Sears or auto parts
How do you change the rear brake pads on a 1999 Honda civic lx 4 door?
When changing rear brake pads on a 1999 Honda Civic safely raise and secure the car. Remove the wheels from both sides. Remove the caliper bracket and old pads. Replace with new pads.
How do you change the brake pads on a '91 Honda Civic?
Remove the bottom caliper bolt. Loosen the top bolt alittle and the whole caliper will swing up and out of the way(i use a peice of wire and hook it to the spring to keep it out of the way)Now you can remove the pads and install new. Force the caliper piston flush with the caliper frame using a large c-clamp.Now the new pads will slide over the rotor.
How do you compress rear brake caliper piston on 2002 Honda accord ex?
You twist it in. use a big screw driver or big flat object to screw it in counter clockwise. You will see a big slit in the piston to do this
