If parking brake is operated through service brake--then piston is threaded into caliper body--special tool is needed (not expensive) available at Sears or auto parts
Dot 3 or Dot 4
you take it to someone.
The brake lights may not work on a 1993 Honda Prelude if the brake light switch is no longer working. The brake light switch is in the steering column just above where the brake pedal is bolted to it. There is also a chance that a brake light fuse is blown.
You need to turn (screw, rotate) the piston clockwise in the caliper a large number of times to make it fully retract. You can insert some kind of tool into the indentations in the face of the piston, or grip the very top edge of the piston with pliers in order to turn it. It has to be fully retracted to allow enough space for "new" pads to be installed.
turn the brake piston to adjust. adjust all the way down.
if u want to talk u can talk about the wwe ok
It may be wired wrong.
You have to be more specific and tell if it is a brake or engine problem. There are to many to tell where all are located.
The wire should rest at 12V+ or zero but when the parking brake is on the wire goes 12V- .
No, the license plate light is wired in with the rear tail lights, not the brake lights.
Crack the bleeder screw pry calipers apart with screw driver rebuild the brake ....tip to get brake piston out use compressed air
It is threaded-They make a special tool (NOT EXPENSIVE) available at Sears