The light is on because there is a problem with the SRS (Air bags). It is hazardous to work on this system so I suggest you have this repaired by a professional. They will reset the light after the repair.
The light is on because there is a problem with the SRS. Have it repaired and the light will go off.
You are likely referring to the SRS light. When the SRS light goes on, it is letting you know to get the airbag system in your car checked out.
The SRS light refers to the airbag. Take the car down to autozone, or your local mechanic and have them plug it in and read the trouble codes. Then they can tell you what exactly is wrong with it.
The SRS light on a 1995 Honda Civic can be reset by jumping the wire clip. Unplug the SRS wire clip found under the dashboard. Take two wires and insert them into the clip. Tie the wires together and turn the car on and off twice. This will reset the SRS system.
The SRS (Supplemental Restraint System) light is on because the SRS module detected a fault. Until the fault is repaired the light will remain on. Once the repair is correctly done the SRS light will reset itself.As long as the SRS light is on the SRS will not function if you should need it.
SRS light indicates airbag fault, if this is showing then you should get your car checked.
The SRS light (airbag and seat bealts) comes on when the computer detects a malfunction and sets a code. You can not turn the light off until the cause of the code has been repaired.
Found the problem to be a bad battery. Get a new battery (tested under a load at the car store) and reset the SRS light at the dealership or if you are mechanically inclined search the web on how to reset the light. This worked for me and the light has stayed off.
By having a professional repair the problem with the SRS (air bags) that has triggered the light. Not a DIY repair.
Go to a mechanic and have them check the SRS system. The light should only illuminate in the event of a malfunction.
No...but can pass when ur SRS light on
The SRS light stays on when the airbag computer detects a malfunction and sets a code. The light can not be turned off until the malfunction is repaired.