I have always used a three inch 3/8 drive extension with a 1/2" or a 13 millimeter swivel socket on an air ratchet. But you should know that I have small hands and I can slip my right hand between the H-pipe and the bellhousing and guide the socket on the top bolt which is the hard one. Most people can't do this.
9.9 sec for 1998 mustang im guessing a little under that for a gt
In my 1998 GT the gears are 2:73.
Call autozone they usually have a list of which parts fit which years.
Right next to the bell housing on the passenger's side. You can access it from underneath the car. (GT 4.6L modular engine)
Yes they do.
The normal operating water temperature is 210 degrees for a 1998 Ford Mustang GT 4.6L. The 1998 Ford Mustang was a 4th generation Ford Mustang.
Yes it is, Ford is the make and Mustang is the model. All mustangs are fords. GT, or Grand Touring, is the special package of current mustangs. But an 06 mustang GT is only the same as mustangs of its year, so a 1998 Mustang GT is not the same car.
Yes! they have lots of wires.
8.8
Special Vehicle Team ================================================ But a Ford Mustang GT is not one of Fords " special " models
they have the same exact dimensions. I just did this swap a week ago and it was fine.
tune it, pretty obvious