Auto Parts and Repairs
Ford Explorer

How do you go about opening the hood of a 94 Ford Explorer if the latch does not release it?

303132

Top Answer
User Avatar
Wiki User
Answered
2015-07-15 19:45:57
2015-07-15 19:45:57

try having someone bump the hood while you pull the latch

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


use the gas tank to masturbate and ejaculate in the engine

how do I get into my 99 explorer with it being locked and the latch being broke

Inside the door, on the back of the door latch/lock assembly.

On a 2000 Ford Explorer : The ELECTRIC fuel pump is INSIDE the fuel tank . It is installed through an opening on the top of the tank

http://www.explorerforum.com/forums/showthread.php?t=144108 see this link - http://www.explorerforum.com/forums/showthread.php?t=144108

Wheres the fuel pressure release valve on the 1999 Ford Explorer?

On a 2001 Ford Explorer : The electric fuel pump is INSIDE the fuel tank ( it is installed through an opening on the top of the fuel tank )

Open the drivers door and on the end of the door ( or the latch pillar ) you will see an information sticker . One of the things it shows is the original size of tires on your 1998 Ford Explorer from the factory

On a 2001 Ford Explorer Sport : Open the drivers door and you will see an information sticker that shows the original size of tire on the vehicle from the factory ( the sticker is on the latch pillar )

The hood latch on a 2013 Ford Escape is located in the front of the vehicle under the hood towards the left. Before the hood will open, you will also need to release the hood latch inside your vehicle.

On a 2004 Ford Explorer : Open the drivers door , and on the latch pillar you will see an information sticker . One of the things it shows is the original size of tires on the vehicle from the factory

There should be an engine belt diagram near the latch that keeps your hood closed.

some of them were on recall for the striker on the hood My hood latch was sticking.. I sprayed wd-40 and put some white petroleum grease all over the latch assembly.. No more sticking..

I wish I had the answer to this, my 2002 explorer does the same thing and it is driving me crazy ! I have tried everything. Hope you get some answers!!

On a 2003 Ford Explorer Sport : Open the drivers door and on the latch pillar you will see an information sticker . One of the things the sticker shows is the original size of tires on the vehicle from the factory

On a 2003 Ford Explorer : Open the drivers door and there is an information sticker on the latch pillar You will find the axle code under " axle " Once you have the axle code you can determine the axle ratio

most of the time if you pop the trunk and look at the latch on the trunk itself you will see a defeat switch to disengage the trunk from opening without a key

No, the door on a 1998 Ford Explorer will not fit a 1992 Ford Explorer.

How do you replace the tail gate latch on a Ford f150

I had the same problem had someone push down hard on the front hood while I pulled the inside hood release then put wd 40 lubricant.

On a 2001 Ford Explorer : Open the drivers door and on the end of the door ( or the latch pillar ) you will see an information sticker . One of the things the sticker shows is the original size of tires on the vehicle from the factory

I had to do this on my 97 Ford Explorer a month ago or so. It's easy. You should be able to go through the grill from the outside and unscrew the four bolts or so on the hood release mechanism (reassuring huh?) From there, lift the hood and the latch mechanism should come out with the hood. Detach the cable from the latch mechanism(if your cable is fine, you're in great luck) Take the latch to a junkyard and find one that looks similar(same position of bolt holes, and latch) Attach the cable to the new latch, attach the new latch to your car, it might take a while positioning it so it lines up right but I did it myself for only fifteen bucks.(cost of latch at junkyard from a different pickup).

Motorweek - 1987 Ford Explorer - 25.15 was released on: USA: 16 December 2005

Ford Explorer was created in 1991.

Take it to the body shop as they have to open them after wrecks. You need to go to the Dealership and get a new cable. If you wish not to try and put it on. The people at the Dealership will do it for you. They are actually easy to put on.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.