Want this question answered?
every silverado through1994 had problems with the thermostat. i have replaced mine 3 times and finally i just got auto meter gauges. buy some cheap autometers and hook it up and i guarantee it will read normal. also oil pressure gauge problems often occur. while your in their you might as well replace that too with an autometer gauge.
The most effective location for a water temperature gauge on a vehicle is on the head or the side of the block. Generally, water temperature gauges are more accurate and fit better in these locations.
Your oil temperature gauge will connect to the oil pressure sensor. The water temperature gauge will hook up to the water temperature sensor. The oil pressure sensor will be on the left-hand side of the engine and the water temperature sensor will be on the front of the engine.
how do you hook up a sunpro super tach 2
The fuel level gauge is in the tank
A yarn label gives the gauge using the hook recommended for that yarn. If you are working a pattern in 4 play worsted weight yarn but using an E hook, your pattern may give you the gauge. Given you do not have a pattern from which to work, you will have to make a swatch to determine the gauge as it is different from person to person depending your personal tension as you work.
the purple wire
The 2003 Toyota Tacoma has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
need to know how to hook up the wires on the engine on F-150 pick up to make a pro tach rpm gauge work
When hook ups are available at campsites there are two options, full and water. Normally the full hook up includes electricity and water, whereas the water hook up does not include electricity.
you hook it up to the white wire that comes out of your O2 sensor
Your surge tank needs to be filled with air. There is a schraeder valve in the top of the tank that will allow you to hook a tire pump to it. Fill it with enough air to stop the hammering.