we can increase the current in battery by using current amplifiers or chopper's s the easy way to increase the current in battery........
The increase in current (assuming resistance is the same and increase in voltage will lead to an increase in current) will fry your portable radio.
Ohm's Law states that Voltage = Resistance (Ohms) * Current (Ampere). So when you increase voltage, you increase current.
The current will increase to a very large value
Using a stronger battery can increase the current flowing through the electromagnet, which in turn can increase the strength of the magnetic field produced by the electromagnet. So, a stronger battery can result in a stronger electromagnet.
If each battery is identical, yes.
The current in a circuit, expressed in milliamperes, is1,000 x (battery or power supply voltage)/(resistance connected between the power supply terminals)If you increase the voltage of the battery or power supply, the current in the circuitincreases proportionally, at least until something in the circuit gets hot, melts, fuses,and opens the circuit.
If a 1.5 volt battery is replaced by a 9 volt battery in a circuit, the current flowing through the circuit will likely increase. This is because the higher voltage of the 9 volt battery will provide more electromotive force, pushing more current through the circuit, assuming the resistance remains the same.
just get a inverter that will increase the voltage by quite a lot well the current anyway.
No, a battery's weight does not increase when it is charged.
yes they increase the total power if you using them together. if you add two 12 V dc battery in parallel than equivalent Voltage is 12 volt but effective current will become double. if you add them in series than voltage will become 24 V but current will not increase remain same. Hence it is increasing power by increasing voltage or current.
When the switch is closed, it creates a complete circuit for the flow of electricity from the battery. This allows the electrons to move freely and increases the flow of current in the circuit.
To increase the current you either need to reduce the resistance of the load or increase the voltage. Typically a higher wattage light bulb will decrease resistance or you could put multiple batteries in series.