how to change a cv joint on 96 escort
its not the trans but the u joints
The ball joints connect the hub to the control arm. They are the load carrying part for the weight on the vehicle.
You don't they're greased and sealed at the factory
It will be added to the transmission.
Type your answer here... how to install lower balljoints on 2007 caliber
Worn U joints, flex disks, or CV joints.
buy american
it has a solid front axle, therefore it has u joints, not cv joints found on independent front suspension(ifs) of GMs. CV joints are gonna be awful hard to install on a solid front end...
Possibly weak u-joints or transmission mounts
QUOTE::::On the side of the transmission there will be a plug. remove the plug and check the fluid level. If fluid pours out when you remove it, that means the transmission is full.. if not, add fluid through this hole till it pours out. This information is completely wrong! There is no fill plug on the escort GT manual trans.. the fill hole and level check are the speed sensor... remove the 10mm bolt twist and pull up the speed sensor, re-fill, and if the plastic gear on the speed sensor is wet, it is full.
motorcraft . com lists the same lower ball joint part number for the 1997 and 2002 Ford Escort ( Motorcraft MCS 104185 )
its in the transmission where the cv joints enter in thata about it