0
The A/C systems blower motor on a 1993 Acura Integra is located behind the glove box on the passenger side of the vehicle. Replacement requires removal of the glovebox, lower passenger dash, and covers. The blower motor is located next to the evaporator, and held by several mounting screws. Just unmount and unplug the blower motor to install the replacement unit.
What else can I help you with?
What do i do if my heater stops blowing air in your 1993 acura integra?
check for a blown fuse that says heater or blower motor
Can you put an 1997 Acura Integra motor into a 1994 Acura Integra?
Yes it will fit.
Acura Legend blower motor resistor?
The blower motor resister for an Acura Legend drops the voltage to the blower motor. This is what allows the motor to run slower for the medium and low settings.
How many hours will it take to install a blower motor on 1993 acura legend?
Type your answer here... 2 hrs
How do you remove blower motor for 95 Acura Legend?
To remove the blower motor from a 1995 Acura Legend, first disconnect the negative battery cable to ensure safety. Then, remove the passenger side lower dashboard panel and any necessary trim pieces to access the blower motor housing. Disconnect the electrical connector and unbolt the blower motor from its housing, then carefully pull it out. Reverse the steps to install the new blower motor.
Where is the blower motor resistor in a 1992 acura integra gs?
Under the glove box. Remove the glovebox and you cant miss it...connect to the harness. Attached with 2 screws.
Why did your blower motor just stop working 1991 acura legend?
it's the blower motor
How do you know where on a the gear to install a new motor for the drivers side window of a 1999 acura integra?
It does not matter, the motor will continue to turn either way until stopped by the window regulator.
how to change blower motor in 1992 acura legend?
To change the blower motor in a 1992 Acura Legend, first disconnect the negative battery cable. Remove the dashboard panel or glove compartment to access the blower motor, which is typically located under the dashboard on the passenger side. Disconnect the wiring harness and remove the screws securing the blower motor in place, then take out the old motor. Install the new blower motor by reversing the removal steps, ensuring all connections are secure before reassembling the dashboard.
How do you replace a 1996 Acura TL blower motor?
To replace the blower motor in a 1996 Acura TL, first disconnect the negative battery cable to ensure safety. Remove the glove compartment to access the blower motor housing; this typically involves unscrewing screws and detaching any clips. Once exposed, disconnect the wiring harness from the blower motor, unbolt it, and then remove the old motor. Install the new blower motor by reversing the removal steps, ensuring all connections are secure, and finally reconnect the battery.
What is the easiest way to remove and replace the blower motor for a 1996 Acura TL?
To remove and replace the blower motor in a 1996 Acura TL, first disconnect the negative battery cable to ensure safety. Then, access the blower motor by removing the glove box for better visibility and space. Disconnect the electrical connector and the retaining screws of the blower motor, then carefully pull it out. To install the new blower motor, reverse the steps, ensuring all connections are secure before reconnecting the battery.
How do you remove and install blower motor on a 1994 Toyota pickup?
how to install a blower motor for a 1994 Toyota pickup
